Fittings

Conduit Body, Type LL, 1-1/2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type LL Iron Conduit Bodies

Conduit Clamp With Installed Strut Clip, Extra Duty, 3/4 Inch Diameter, Non-Metallic, UV Rated, For Use With Rigid/IMC/PVC Conduit in Outdoor Applications

Category: Strut Channel Universal Conduit Clamps

Grounding Bushing, Specification Grade, 1-1/2 Inch, Threaded, Insulated, Aluminum Body and Copper Lay-In Lug, 14 - 4 AWG, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Body Cover, Type: Wedge, Form 8, 1-1/2 Inch, Iron

Category: Iron Conduit Body Covers

Non-Metallic Sheathed Cable and Service Entrance Cable Connector, 3/4", Cable Range 0.44 - 0.74 Inch, Malleable Iron

Category: Iron NM Cable Connectors

Locknut, 3/8 Inch Diameter, Steel, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

EMT Set Screw Connector, 4 inch, Material: Die Cst Zinc.

Category: Die Cast EMT Set Screw Connectors

Conduit Body, Type: TB, Form 8, Size: 1/2 Inch, Material: Grayloy Iron, For Use With Rigid/IMC Conduit

Category: Type TB Iron Conduit Bodies

Bulkhead Fitting, 1/2 Inch, Insulated Throat, Nitrile Sealing Ring, Zinc, For Use With Rigid/IMC Conduit

Category: Die Cast Through-Bulkhead Conduit Hub Fittings

Liquidtight Connector, 90°, 3 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Conduit Locknut, 6 Inch Diameter, Steel With Zinc Plating

Category: Steel Conduit Locknuts

Standard: Ul 514b, Csa C22.2, Nec, Mil. Spec: Mil-f-28675, Size: 0.5in, Material: Malleable Iron, Finish: Zinc Electroplated

Category: Iron Rigid Conduit Elbows

Z Series Fittingscorrosion Resistant Nylon Cord Connectors

Category: Straight Non-Metallic Cord Grips

Coupling, Size: 2 inch, Material: PVC Coated Aluminum, Metric Size Designators: 53 Pipe Size (Inches): 2 Outside Diameter With Rib (Inches): 2.969 Threads Per Inch: 11-1/2 Effective Length (Inches) - L2: 0.7565 Total Length of Threads to Vanish Point (Inches) - L4: 1.0582 Pitch at End of Thread 3/4 in. Taper (Inches) - E0: 2.269

Category: PVC Coated Couplings

Conduit Body, Type: TB, FM7, Size: 1 1/2 inch, Material: PVC Coated Aluminum. Includes: Cover & Gasket, Dimension A (Inches): 8.19 Dimension B (Inches): 5 Dimension C (Inches): 2.52 Dimension D (Inches): 1.94 Dimension E (Inches): 5.44

Category: PVC Coated Type TB Conduit Bodies

Conduit Body, Type: T, Mark 9, Size: 1/2 Inch, Material: Copper Free Aluminum.

Category: Type T Aluminum Conduit Bodies

Liquidtight Connector, 90°, 2-1/2 Inch, Grounding, Malleable Iron, Insulated, 2 - 4/0 AWG

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Reducing Bushing, 1 x 1/2 Inch, Threaded, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Liquidtight Cord Grip, Insulated, Strain-Relief, Size: 1 Inch, Watertight, Zinc Die Cast

Category: Straight Die Cast Zinc Cord Grips

THB 5355GR 1-1/4IN INSUL GRND

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

PVC Conduit Strap, 2-Hole, Diameter 3/4 Inch, PVC, Gray

Category: 2-Hole PVC Straps

TMC2X Connectors for MC Cable, NPT Size: 1", Cable Armor Diameter: 0.79" - 1.10", Cable Jacket Diameter: 0.87" - 1.18", Material: Aluminum. Watertight, Explosion-Proof/Dust-Ignitionproof, For Use With Jacketed Metal Clad Cable in Hazardous Locations.

Category: Aluminum Cable Glands

Liquidtight 90° Connector, 3", Grounding, Insulated

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

App Stsr200 2-in L/t Str flex Conn

Category: Stainless Steel Strain-Relief Grips With Mesh