Search results

Buchanan, Y-Tap Kit, Breakaway Y-Tap Kits, Non-Fused, Voltage Rating: 600 V, Amperage Rating: 70 AMP Line, 30 AMP Load, Line Side Cable Size: 10, 8, 6, 4, 2 AWG, Line Side Crimp Type: Copper, Line Side Insulation Diameter: .155 - .430 IN, Load Side Cable Size: 12 - 6 AWG, Load Side Crimp Type: Copper, Load Side Insulation Diameter: .120 - .430 IN

Category: Streetlight Breakaway Y-Tap Kits

IDEAL, Heat Shrinkable Tube, Thermo-Shrink«, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.160 IN, Length: 12 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 2/0 AWG - 350 MCM, Nominal Recoveredi.d. (max.): 0.470 IN, Expanded I.d. (min.): 1.500, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1500

Category: Heavy Wall Heat Shrink

Eaton Safety Socket Mechanical Lug, Single #4-500 Kcmil Mechanical Lug

Category: 1-Conductor Aluminum Mechanical Lugs

Bronze, service post connector, 1 SOL-4/0 STR, male, two cable, type SP2.

Category: 1-Wire Service Post Connectors

THB BC14-6 NON-INS RING TERM

Category: Non-Insulated Ring Tongues

Power Distribution Block Cover

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

THB NW83 UNINS HITEMP RING TE

Category: Non-Insulated Ring Tongues

THB K656LR-K0270 ELBOW KIT 60

Category: T-Body Deadbreak Connectors

3M 5651-1/0 Cold Shrink Termi

Category: Medium Voltage Outdoor Cold Shrink

Bonding nut for threaded M6 rail fasteners.

Category: Bonding Connectors

#10 AWG (6mm²) jumper; 24 (.61m) length; factory terminated on both ends; one-hole lug on surge suppressor to two-hole lug on grounding strip/busbar side; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2, M6 x 12mm, #10-32 x 1/2 and M5

Category: Bonding Jumpers

THB 3909BU GROUND CLAMP

Category: U-Bolt Ground Clamps

THB K656LR-L0330 600 AMP CONN

Category: T-Body Deadbreak Connectors

1/4" x 2" x 48" Grounding Busbar.

Category: Bus Bars

Grounding busbar; 19" (483mm) length; tin-plated; twenty holes arranged for flexibility in mounting with twenty #12-24 x 1/2" hex head screws installed; mounting hole sets have 5/8" (15.9mm) spacing; provided with two cage nut bonding studs and four #12-2

Category: Bus Bars

THB 3908BU GROUND CLAMP

Category: U-Bolt Ground Clamps

Airplane Grounding Connector with Cover

Category: Structural Grounding Studs

THB A18-14F TERMINAL FORK TNG

Category: Non-Insulated Standard Fork Terminals

Crystal clear thin wall PVC heat shrink, 1.5" (38.1mm) diameter, clear polyvinyl chloride, 100 ft. (30.5m) per reel.

Category: Thin Wall Heat Shrink

3MÖ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.

Category: Medium Voltage Cold Shrink Splice Kits

3M 5411-CI-2 Molded Rubber In

Category: Medium Voltage Cold Shrink Splice Kits

CRO TMC-K7 2 1/2 COLD SHRINK

Category: Medium Voltage Outdoor Cold Shrink

Copper Grounding Bus Bar Kit, 4in Wide, 12in Length, 24 Mounting Points

Category: Bus Bars

Crystal clear thin wall PVC heat shrink, 1" (25.4mm) diameter, clear polyvinyl chloride, 100 ft. (30.5m) per reel.

Category: Thin Wall Heat Shrink