"wc-r-c"

13 Found

In Stock Only

List

Grid

NSI Tork

POLARIS Ins Multi-Tap 750 4 Port DSE

4 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0335870

CAT #: IPLD750-4

UPC: 662381926029

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 500 10 Port

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250238

CAT #: IPLMD500-10

UPC: 662381945082

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 3/0 10 Port DSE

10 Wire Polaris 3/0 - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250177

CAT #: IPLD3/0-10

UPC: 662381927088

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 500 12 Port

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250239

CAT #: IPLMD500-12

UPC: 662381945105

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 250 4 Port

4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0136875

CAT #: IPLMD250-4

UPC: 662381943026

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 250 12 Port DSE

12 Wire Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250163

CAT #: IPLD250-12

UPC: 662381923103

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Stack Ins Multi-Tap 750 10 Port

10 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250198

CAT #: IPLDS750-10

UPC: 662381951755

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Stack Ins Multi-Tap 750 12 Port

12 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250201

CAT #: IPLDS750-12

UPC: 662381951762

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Multi Tap 250 6 Port DSE Bagged

6 Wire Bagged Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250175

CAT #: IPLD250-6B

UPC: 662381955043

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS HD Ins Multi-Tap 750 8 Port DSE

8 Wire Polaris Insulated 750 - 250 MCM Heavy Duty Connector Block, Either Side Wire Entry Polaris Insul-Tap Heavy Duty Connectors are double the size of the standard IPLD Series connector with two pressure screws provided for each cable to ensure the best connection possible. Designed, built and tested to handle even the most demanding applications from 250 MCM to 750 MCM. Insulated with high-dielectric strength plastisol molded for a precise fit. Supplied with removable access plugs to allow for cable entry from either side of the connector. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV Resistant. Will not support combustion. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250195

CAT #: IPLDH750-8

UPC: 662381926555

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 750 8 Port DSE

8 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0832308

CAT #: IPLD750-8

UPC: 662381926067

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi Tap 250 2 Port Bagged

250 MCM - 6 AWG bAGGEDPolaris Insulated Tap Connector- Dual Sided Entry Polaris Insul-Tap Connectors are suitable for connecting two wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0250286

CAT #: IT-250B

UPC: 662381953049

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

NSI ITG-3/0B 3/0-4 AWG ( B,C,D) 2/0

NSI ITG-3/0B 3/0-4 AWG ( BCD)

Item #: 0250298

CAT #: ITG-3/0B

UPC: 662381959539

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 750 4 Port DSE

4 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0335870

CAT #: IPLD750-4

UPC: 662381926029

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 500 10 Port

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250238

CAT #: IPLMD500-10

UPC: 662381945082

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 3/0 10 Port DSE

10 Wire Polaris 3/0 - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250177

CAT #: IPLD3/0-10

UPC: 662381927088

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 500 12 Port

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250239

CAT #: IPLMD500-12

UPC: 662381945105

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 250 4 Port

4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0136875

CAT #: IPLMD250-4

UPC: 662381943026

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 250 12 Port DSE

12 Wire Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250163

CAT #: IPLD250-12

UPC: 662381923103

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Stack Ins Multi-Tap 750 10 Port

10 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250198

CAT #: IPLDS750-10

UPC: 662381951755

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Stack Ins Multi-Tap 750 12 Port

12 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250201

CAT #: IPLDS750-12

UPC: 662381951762

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Multi Tap 250 6 Port DSE Bagged

6 Wire Bagged Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250175

CAT #: IPLD250-6B

UPC: 662381955043

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS HD Ins Multi-Tap 750 8 Port DSE

8 Wire Polaris Insulated 750 - 250 MCM Heavy Duty Connector Block, Either Side Wire Entry Polaris Insul-Tap Heavy Duty Connectors are double the size of the standard IPLD Series connector with two pressure screws provided for each cable to ensure the best connection possible. Designed, built and tested to handle even the most demanding applications from 250 MCM to 750 MCM. Insulated with high-dielectric strength plastisol molded for a precise fit. Supplied with removable access plugs to allow for cable entry from either side of the connector. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV Resistant. Will not support combustion. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250195

CAT #: IPLDH750-8

UPC: 662381926555

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 750 8 Port DSE

8 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0832308

CAT #: IPLD750-8

UPC: 662381926067

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi Tap 250 2 Port Bagged

250 MCM - 6 AWG bAGGEDPolaris Insulated Tap Connector- Dual Sided Entry Polaris Insul-Tap Connectors are suitable for connecting two wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0250286

CAT #: IT-250B

UPC: 662381953049

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

NSI ITG-3/0B 3/0-4 AWG ( B,C,D) 2/0

NSI ITG-3/0B 3/0-4 AWG ( BCD)

Item #: 0250298

CAT #: ITG-3/0B

UPC: 662381959539

Category: Dual Sided Entry Wire Connector Blocks

Company wide:

13 Items found