Search results

StructuredGround™ Grounding Strip, 45RU, Threaded Rail

Category: Cable Tray Mounting Hardware

End Cap Fitting For Use With LDPH10 and LD2P10 Raceway, White, ABS, Length 1.25 in.

Category: Cable Tray Ends

Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod

Category: Cable Tray Mounting Hardware

The FiberRunner® 6x4 Channel can be used with fittings and brackets to design a routing system to segregate, route, and protect fiber optic and high-performance copper cables. The cable routing channel accepts cable retainers or a hinged cover.

Category: Straight Channel Cable Tray

FiberRunner® Hinged Channel, 2 Inch Wide x 2 Inch Deep x 6 Feet Long, PVC, Yellow

Category: Straight Channel Cable Tray

1/4" plastic bolts and wing Connector fastens channel and fittings together for added strength and rigidity.

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

The fiber mounting FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 12" (305mm) width is used to support a FiberRunner® 4x4 and 6x4 Channel above or below the Wyr-Grid® 12" Pathway using the same 1/2" or 12mm threaded rod used to support

Category: Cable Tray Trapeze Hangers

The Wyr-Grid® Pathway Section protects cables between the Main Distribution Area and the Equipment Distribution Area. Unlike other pathways, it installs quickly and can be modified easily, optional sidewalls snap on without extra hardware or tools. Splice

Category: Straight Wire Basket

Optional snap-on cover for channel FR24X4BL10. Supplied in four 30 long pieces.

Category: Straight Cable Tray Covers

Used to carry cables horizontally throughout the system. Use QuikLock Coupler FRBC24X4BL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 24" (610mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 24" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB24BL bra

Category: Cable Tray Trapeze Hangers

Used to support 12x4, 6x4, and 4x4 systems attaching to the top of the 19" wide version of the Panduit NF4PR84 4 post rack. Contains all hardware required to assemble bracket to the top of the 4 post rack. Bracket accepts 5/8" threaded rod (not included).

Category: Straight Channel Cable Tray

The FiberRunner® 4x4 Channel can be used with fittings and brackets to design a routing system to separate, route, and protect fiber optic and high-performance copper cables. The cable routing channel accepts cable retainers or a hinged cover.

Category: Straight Channel Cable Tray

Used to carry the cables throughout the Fiber-Duct Routing System. Accepts cover C4BL6. Cover sold separately.

Category: Straight Channel Cable Tray

Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. Bracket halves slide into position and clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded ro

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Optional snap-on cover for channel FR24X4YL10. Supplied in four 30 long pieces.

Category: Straight Cable Tray Covers

Used to fully enclose 12x4 channel in conjunction with the Spill-Over Junction FRSPJ2X2BL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Straight Cable Tray Covers

Used to carry the cables horizontally throughout the system. Accepts hinged cable retainers FRCR4BL, hinged cover FRHC4YL2 or split hinged cover FRSHC4YL2. Use QuikLock Couplers FRBC4X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

1/4" plastic bolts and hex nuts fastens channel and fittings together for added strength and rigidity.

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Used to carry the cables horizontally throughout the system. Accepts hinged cover HC2BL6. Use QuikLock Coupler FBC2X2BL to attach channel and/or fittings. Base and covers sold separately.

Category: Straight Channel Cable Tray

Used to carry cables horizontally throughout the system. Use QuikLock Coupler FRBC24X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

The fiber mounting 2-piece ladder rack bracket attaches to either a 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or a 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. The bracket halves slide into position and clamp together on the ladder rack rail, which allows

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Used to fully enclose 12x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Straight Cable Tray Covers

Used to carry the cables horizontally throughout the system. Accepts cable retainers FRCR12BL-X or hinged cover FRHC12BL6. Use QuikLock Coupler FRBC12X4BL to attach channel and/or fittings.

Category: Straight Channel Cable Tray