Skip to main content

"10x10x4""

31 Found
nVent Hoffman

Wireway End Plate, 10" x 10", Type 1, Gray, No KO

Item #: 0378000
CAT #: F1010GCPNK
UPC: 783510467401
Company wide:
nVent Hoffman

Wireway Panel Adapter, Type 1, Lay-In, 10" x 10", Steel, Gray

Item #: 0414228
CAT #: F1010GPA
UPC: 783510458409
Company wide:
nVent Hoffman

Elbow 90-Degree Lay-in Wireway, 10.00x10.00, Gray, Mild Steel

Item #: 0411756
CAT #: F1010G90E
UPC: 783510455903
Company wide:
nVent Hoffman

Wireway Connector, Type 1, Lay-In, 10" x 10", Steel, Gray

Item #: 0377998
CAT #: F1010GUC
UPC: 783510463908
Company wide:
nVent Hoffman

Wireway End Plate, 10" x 10", Type 1, Gray, Knockout

Item #: 0396477
CAT #: F1010GCP
UPC: 783510467203
Company wide:
nVent Hoffman

Elbow 90-Degree Outside Opening, fits 10.00x10.00, Gray, Steel

Item #: 0713646
CAT #: F101090EOUT
UPC: 783510131555
Company wide:
nVent Hoffman

Closure Plate, 10.00x10.00, Galvanized, Steel

Item #: 0713881
CAT #: F1010GCPNKGV
UPC: 783510467500
Company wide:
nVent Hoffman

Elbow 45-Degree Lay-in, 10.00x10.00, Gray, Steel

Item #: 0471317
CAT #: F1010G45E
UPC: 783510456900
Company wide:
nVent Hoffman

10x10 90 Elbow Inside Openin

Item #: 0755591
CAT #: F101090EINGV
UPC: 783510131470
Company wide:
nVent Hoffman

Wireway 90° Elbow, 10" x 10", Steel, Gray

Item #: 0604661
CAT #: F101090EIN
UPC: 783510131418
Company wide:
nVent Hoffman

Flush Tee 90-Degree, 10.00x10.00, Gray, Steel

Item #: 0530507
CAT #: F1010GT
UPC: 783510468200
Company wide:
nVent Hoffman

Telescope Fitting, 10.00x10.00, Gray, Steel

Item #: 0848856
CAT #: F1010GA
UPC: 783510464004
Company wide:
nVent Hoffman

Cross Fitting, fits 10.00x10.00, Gray, Steel

Item #: 0852821
CAT #: F1010X
UPC: 783510131852
Company wide:
nVent Hoffman

Elbow 90-Degree Tee-Cross, 10.00x10.00, Gray, Steel

Item #: 0604487
CAT #: F1010G90TX
UPC: 783510451905
Company wide:
nVent Hoffman

Sweep Tee LayIn Wireway, fits 10.00x10.00, Galvanized, Mild Steel

Item #: 0277283
CAT #: F1010TGV
UPC: 783510131777
Company wide:
nVent Hoffman

Telescope Fitting, 10.00x10.00, Galvanized, Steel

Item #: 0277287
CAT #: F1010GAGV
UPC: 783510466503
Company wide:
nVent Hoffman

Elbow 90-Degree Lay-in-Tee-Cross, 10.00x10.00, Galvanized, Steel

Item #: 0277291
CAT #: F101090TXGV
UPC: 783510453701
Company wide:
nVent Hoffman

Wireway Connector, Type 1, Lay-In, 10" x 10", Steel, Galvanized

Item #: 0713883
CAT #: F1010GUCGV
UPC: 783510571702
Company wide:
nVent Hoffman

Elbow 90-Degree Lay-in Outside Opening, fits 10.00x10.00, Galvanized, Steel

Item #: 0277293
CAT #: F101090EOUTGV
UPC: 783510131630
Company wide:
nVent Hoffman

Support Hanger, 10.00x10.00, Galvanized, Steel

Item #: 0713882
CAT #: F1010GSHGV
UPC: 783510468002
Company wide:
nVent Hoffman

Reducer, 10x10 to 8x8, Gray, Steel

Item #: 0499423
CAT #: F1010G88R
UPC: 783510467609
Company wide:
nVent Hoffman

Panel Adapter LayIn Wireway, 10.00x10.00, Galvanized, Mild Steel

Item #: 0713878
CAT #: F1010GPAGV
UPC: 783510459901
Company wide:
nVent Hoffman

Elbow 45-Degree Lay-in, 10.00x10.00, Galvanized, Steel

Item #: 0713885
CAT #: F101045EGV
UPC: 783510458300
Company wide:
nVent Hoffman

Elbow Sweep 90-Degree, 10.00x10.00, Gray, Steel

Item #: 0513938
CAT #: F1010G90SE
UPC: 783510456108
Company wide:
nVent Hoffman

Wireway End Plate, 10" x 10", Type 1, Gray, No KO

Wireway Closure Plate without KO, Size/Dims: 10.00x10.00, Material/Finish: Steel/Gray. For use with Type 1, Wireway.
Item #: 0378000
CAT #: F1010GCPNK
UPC: 783510467401
Category: Wireway Closure Plates
Company wide:
nVent Hoffman

Wireway Panel Adapter, Type 1, Lay-In, 10" x 10", Steel, Gray

Wireway Panel Adapter, Size/Dims: 10.00x10.00, Material/Finish: Steel/Gray. For use with Type 1, Wireway .
Item #: 0414228
CAT #: F1010GPA
UPC: 783510458409
Category: Wireway Panel Adapters
Company wide:
nVent Hoffman

Elbow 90-Degree Lay-in Wireway, 10.00x10.00, Gray, Mild Steel

Lay-in Painted 90-Deg Elbows with removable sides retaining feature elbow orientation. This 90-Degree Elbow Lay-in Wireway, F1010G90E item measures 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0411756
CAT #: F1010G90E
UPC: 783510455903
Category: Wireway Elbows
Company wide:
nVent Hoffman

Wireway Connector, Type 1, Lay-In, 10" x 10", Steel, Gray

Wireway, U-Connector, Size/Dims: 10.00x10.00, Material/Finish: Steel/Gray. For use with Type 1, Wireway.
Item #: 0377998
CAT #: F1010GUC
UPC: 783510463908
Category: Wireway U-Connectors
Company wide:
nVent Hoffman

Wireway End Plate, 10" x 10", Type 1, Gray, Knockout

Wireway Closure Plate with KO, Size/Dims: 10.00x10.00, Material/Finish: Steel/Gray. For use with Type 1, Wireway.
Item #: 0396477
CAT #: F1010GCP
UPC: 783510467203
Category: Wireway Closure Plates
Company wide:
nVent Hoffman

Elbow 90-Degree Outside Opening, fits 10.00x10.00, Gray, Steel

Lay-in Painted 90-Deg Elbow with Outside Opening removable top bottom used for 90-degree turns. This 90-Degree Elbow—Outside Opening, F101090EOUT item fits 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0713646
CAT #: F101090EOUT
UPC: 783510131555
Category: Wireway Elbows
Company wide:
nVent Hoffman

Closure Plate, 10.00x10.00, Galvanized, Steel

Layin Galvanized Closure Plates used for closing and sealing the end of a wireway section or run. This Closure Plate, F1010GCPNKGV item measures 10.00x10.00 inches with a material of Steel finish Galvanized.
Item #: 0713881
CAT #: F1010GCPNKGV
UPC: 783510467500
Category: Wireway Closure Plates
Company wide:
nVent Hoffman

Elbow 45-Degree Lay-in, 10.00x10.00, Gray, Steel

Lay-in Painted 45-Degree Elbows are used for continuous run with 45-degree turns. This 45-Degree Elbow Lay-in, F1010G45E item measures 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0471317
CAT #: F1010G45E
UPC: 783510456900
Category: Wireway Elbows
Company wide:
nVent Hoffman

10x10 90 Elbow Inside Openin

Ww, Type 1, 90? Elbow, Inside, Bulletin F40gf (galvanized Type 1 Lay-in Wirewayfittings), Size/dims: Fits 10.00x10.00, Material/finish: Galvanized
Item #: 0755591
CAT #: F101090EINGV
UPC: 783510131470
Category: Wireway Elbows
Company wide:
nVent Hoffman

Wireway 90° Elbow, 10" x 10", Steel, Gray

Wireway 90° Elbow, Type 1, 10 Inch x 10 Inch, Steel, Gray
Item #: 0604661
CAT #: F101090EIN
UPC: 783510131418
Category: Wireway Elbows
Company wide:
nVent Hoffman

Flush Tee 90-Degree, 10.00x10.00, Gray, Steel

Lay-in Painted 90-Deg Flush Tees used for flush mounting against a vertical or horizontal surface. This 90-Degree Flush Tee, F1010GT item measures 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0530507
CAT #: F1010GT
UPC: 783510468200
Category: Wireway Tee Fittings
Company wide:
nVent Hoffman

Telescope Fitting, 10.00x10.00, Gray, Steel

Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F1010GA item measures 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0848856
CAT #: F1010GA
UPC: 783510464004
Category: Wireway Telescope Fittings
Company wide:
nVent Hoffman

Cross Fitting, fits 10.00x10.00, Gray, Steel

Cross Fittings are used when there are four branches of wireway. This Cross Fitting, F1010X item fits 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0852821
CAT #: F1010X
UPC: 783510131852
Category: Wireway Cross Fittings
Company wide:
nVent Hoffman

Elbow 90-Degree Tee-Cross, 10.00x10.00, Gray, Steel

Painted 90-Degree Elbow-Tee-Crosses can be used as a tee or cross for left or right 90-degree turns. This 90-Degree Elbow-Tee-Cross, F1010G90TX item measures 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0604487
CAT #: F1010G90TX
UPC: 783510451905
Category: Wireway Elbow-Tee-Cross Fittings
Company wide:
nVent Hoffman

Sweep Tee LayIn Wireway, fits 10.00x10.00, Galvanized, Mild Steel

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F1010TGV item fits 10.00x10.00 inches with a material of Steel finish Galvanized.
Item #: 0277283
CAT #: F1010TGV
UPC: 783510131777
Category: Wireway Tee Fittings
Company wide:
nVent Hoffman

Telescope Fitting, 10.00x10.00, Galvanized, Steel

Galvanized Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F1010GAGV item measures 10.00x10.00 inches with a material of Steel finish Galvanized.
Item #: 0277287
CAT #: F1010GAGV
UPC: 783510466503
Category: Wireway Telescope Fittings
Company wide:
nVent Hoffman

Elbow 90-Degree Lay-in-Tee-Cross, 10.00x10.00, Galvanized, Steel

Lay-in Galvanized 90-Deg Elbow-Tee-Crosses used as tee or cross for left or right turns. This 90-Degree Elbow Lay-in-Tee-Cross, F101090TXGV item measures 10.00x10.00 inches with a material of Steel finish Galvanized.
Item #: 0277291
CAT #: F101090TXGV
UPC: 783510453701
Category: Wireway Elbows
Company wide:
nVent Hoffman

Wireway Connector, Type 1, Lay-In, 10" x 10", Steel, Galvanized

Wireway Connector, Type 1, Lay-In, Steel, Galvanized, Size: 10 Inch x 10 Inch
Item #: 0713883
CAT #: F1010GUCGV
UPC: 783510571702
Category: Wireway U-Connectors
Company wide:
nVent Hoffman

Elbow 90-Degree Lay-in Outside Opening, fits 10.00x10.00, Galvanized, Steel

Lay-in Galvanized 90-Degree Elbow Outside Opening have removable top bottom used for 90-degree turns. This 90-Degree Elbow Lay-in Outside Opening, F101090EOUTGV item fits 10.00x10.00 inches with a material of Steel finish Galv.
Item #: 0277293
CAT #: F101090EOUTGV
UPC: 783510131630
Category: Wireway Elbows
Company wide:
nVent Hoffman

Support Hanger, 10.00x10.00, Galvanized, Steel

Lay-in Galvanized Wall Hangers are used to support a wireway run. This Support Hanger, F1010GSHGV item measures 10.00x10.00 inches with a material of Steel finish Galvanized.
Item #: 0713882
CAT #: F1010GSHGV
UPC: 783510468002
Category: Wireway Support Hangers
Company wide:
nVent Hoffman

Reducer, 10x10 to 8x8, Gray, Steel

Reducers are used to reduce to a smaller wireway size. This Reducer, F1010G88R item fits 10x10 to 8x8 inches with a material of Steel colored Gray.
Item #: 0499423
CAT #: F1010G88R
UPC: 783510467609
Category: Wireway Reducers
Company wide:
nVent Hoffman

Panel Adapter LayIn Wireway, 10.00x10.00, Galvanized, Mild Steel

Lay-in Galvanized Panel Adapters are used for securely connecting the wireway to an enclosure. This Panel Adapter, F1010GPAGV item measures 10.00x10.00 inches with a material of Steel finish Galvanized.
Item #: 0713878
CAT #: F1010GPAGV
UPC: 783510459901
Category: Wireway Panel Adapters
Company wide:
nVent Hoffman

Elbow 45-Degree Lay-in, 10.00x10.00, Galvanized, Steel

Lay-in Galvanized 45-Degree Elbows are used for continuous run with 45-degree turns. This 45-Degree Elbow Lay-in, F101045EGV item measures 10.00x10.00 inches with a material of Steel finish Galvanized.
Item #: 0713885
CAT #: F101045EGV
UPC: 783510458300
Category: Wireway Elbows
Company wide:
nVent Hoffman

Elbow Sweep 90-Degree, 10.00x10.00, Gray, Steel

Lay-in Painted 90-Degree Sweep Elbows are used for large-radius turns. This 90-Degree Sweep Elbow, F1010G90SE item measures 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 0513938
CAT #: F1010G90SE
UPC: 783510456108
Category: Wireway Elbows
Company wide:
31 Items found