"ulr-in-16f-ho-rgbw westgate mfg inc"

Ratchet Crimping Tool Crimps Insulated, Heat Shrink And Ferrule Terminals Onto 10-22 Awg Stranded Copper Wire, Adjustable Compound Action Design Puts More Crimping Power Into Each Squeeze, Four Interchangeable Dies With Multiple Cavities Are Specially Designed For Each Terminal Type For 10-22 Awg Terminals, Hard Plastic Carrying Case Keeps Tool And Crimping Dies Organized And Safe From Damage, Built-In Ratchet Ensures Full-Cycle Crimping For A Uniform Crimp Every Time, Dial Adjusts The Amount Of Force Applied To The Crimp, Dual-Material Molded Grips Provide Added Comfort

Category: Wire Crimping Tools

M18™ 3/4" PEX Crimp Jaw for M18™ Short Throw Press Tool, Jaws Are Optimized For One Handed Pressing, For Use With the M18™ Short Throw Press (2674-20C) (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

Forged Wire Stripper 10-20 AWG

Category: Combination Wire Stripper / Cutter Tools

Dieless Hypress, 25.6 in L, 2.5 in W, 6 Tons, Hydraulic Hand Operated Crimping Tool

Category: Wire Crimping Tools

Burndy; Crimping Tool; Patriot; Battery Actuated, Hydraulic Self Contained; Weight: 10.9 Lb; Battery Type: Ni-mh; Battery Rated Capacity: 2.6 Amp-hr; Accessories: Pt208620 Lanyard, Wdietree W Die Holder, Bat18v Hi-capacity Replacement Battery, Patchgr18v (120 Vac) Charger; Recharge Time: Less Than 45 Mint; Covered Head: No; Battery Voltage: 18 V; Dieless: No; Number Of Conductors Accomidated (max): 8 Awg - 600 Kcmil Copper Stranded (ya, Ya-l,ys, Ys-l); 8 Awg - 350 Kcmil Flex;8 - 350 Kcmil Aluminum (ya-a And Ys-a); Die Accommodation: W Dies; Operating Pressure: 7800 Psi; Width: 3-1/2 In; Length: 14.5 In; Height: 13.75 In; Force Developed: 6 Ton; Operating Voltage: 18 Vdc

Category: Wire Crimping Tools

Coax 3-in-1 Crimp Tool

Category: Wire Crimping Tools

Wire Stripper/Cutter, 11-in-1 Folding Multi-Tool

Category: Combination Wire Stripper / Cutter Tools

Self Contained Hydraulic Hand Operated Crimping Tool, 12 Ton, 10000 psi, 8 AWG - 750 kcmil Copper, 8 AWG - 750 kcmil Aluminum,3/16" Rubber Covering

Category: Wire Crimping Tools

Hydraulic Crimp Tool, 17.6 in L, 6 tons

Category: Wire Crimping Tools

Crimps 4-position Rj22 Connectors. Crimps 4- And 6-position Rj11/rj12 Connectors. Crimps 8-position Rj45 (non-keyed) Connectors. Embedded Cable Cutter And Stripper. Crimps 28-24 Awg (.08 - .20 Mm2) Telephone And Data Cables.comfortable Rubber-embedded Handles. Built-in Safety Ratchet Release.

Category: Wire Crimping Tools

IN-LINE LW CRIMP JAW O/D3 GROOVES

Category: Wire Crimping Dies, Adapters, & Blades

6-Piece Hip Kit, Includes: 6-Pocket Hip Pouch, Side Cutter Pliers, 25' Tape Measure, Utility Knife, 7-in-1 Twist-a-Nut Nut/Screwdriver, Wire Stripper (Capacity: 10-18 AWG)

Category: Wire Strippers

Blade Set for 45-091 Wire Stripper, Knife-Type Blades, Strip Wire Up to 7/8 Inches, Handles #10 AWG to #18 AWG Wire

Category: Wire Crimping Dies, Adapters, & Blades

TaskMaster Stripping Tool For Removal of Soft & Hard Outer Jacket Insulation, Cable Diameter 0.18 - 1.14 in, Closed Jaw Design

Category: Wire Strippers

M18™ 5/8" PEX Crimp Jaw for M18™ Short Throw Press Tool, Spring Loaded Design Grips Ring for Precise Alignment, For Use With the M18™ Short Throw Press Tool (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

M18™ 3/4" SS Jaw, Easy Opening Jaw Designed For One Handed Use, Designed For Use With Grinnell® Stainless Steel G-Press™ System, Compatible With M18™ Force Logic Press Tools (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

Wire Stripper, T®-6 T®-Cutter, Capacity: #10 Awg Solid, 1/2 In O.d Fine Stranded; Material: Hardened Steel Blade; Blade Type: Sheer Type.

Category: Wire Strippers

Dieless Hydraulic Crimping Tool, Flip-Open Head, Capacity: Copper 4 AWG - 1000 kcmil, Aluminum 6AWG - 1000kcmil, Includes: Case

Category: Dieless Wire Crimping Tools

Crimp die for use with #1 AWG copper Code conductor size in Panduit tools: CT-2600/L, CT-2600/LINT, CT-2600/LUK, CT-2600/LAUS, CT-2600/TO. Hex style crimp.

Category: Wire Crimping Dies, Adapters, & Blades

Crimp die for use with 3/0 AWG copper Code conductor size in Panduit tools: CT-2600/L, CT-2600/LINT, CT-2600/LUK, CT-2600/LAUS, CT-2600/TO. Hex style crimp.

Category: Wire Crimping Dies, Adapters, & Blades

Fits In All 15T P-Die Type Crimpers, Compatible With All 12T U-Style Dies, Creates Ul Classified Connections When Used With Corresponding Milwaukee® Dies

Category: Wire Crimping Dies, Adapters, & Blades

M18™ 5/8" Viega PureFlow™ Jaw for M18™ Short Throw Press Tool, Jaws Are Optimized For One Handed Pressing, For Use With the M18™ Short Throw Press (2674-20C) (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

Wire Stripper/Cutter, Capacity: 10-20 AWG, Length: 9"

Category: Combination Wire Stripper / Cutter Tools

Swivel-Blade Cable Stripper, Capacity: 1-1/2" and Smaller

Category: Wire Strippers