"ex-0155nsp-mb2l-a etherwan systems, inc"

When partnered as a complete Panduit set, the Panduit® BlackFin® Crimping Tool provides continuous crimping operation. Plus, the open C-crimp head design allows easy loading of crimping dies and connectors, saving time. The crimping tool has a force of 15

Category: Wire Crimping Tools

Crimp installation tool, For installing Pos-E-Kon A, B and V connector contact.

Category: Wire Crimping Tools

Crimping Tool Crimps Non-Insulated Terminals Onto 10-22 Awg Stranded Copper Wire, Adjustable Compound Action Design Puts More Crimping Power Into Each Squeeze, Five Crimping Cavities In One Tool: 22–18 Awg, 18–14 Awg, 14-12 Awg, 12-10 Awg And 10 Awg Terminals, Built-In Ratchet Ensures Full-Cycle Crimping For A Uniform Crimp Every Time, Unique Cavity Design Provides Consistent Crimp From Either Side Of The Tool, Dial Adjusts The Amount Of Force Applied To The Crimp, Dual-Material Molded Grips Provide Added Comfort

Category: Wire Crimping Tools

The controlled cycle crimp tool has a trapezoidal profile and is designed for strength and durability. It is intended for American Wire Gauge (AWG) #8 to 6 (0.10 to 16.0 mm²) insulated and single wire ferrules and American Wire Gauge (AWG) #

Category: Wire Crimping Tools

Easy Stripper Replacement Blade Version 2

Category: Wire Strippers

Strips sizes 14 AWG - 4/0 AWG; Aluminum Frame *Drill is not included*

Category: Wire Strippers

Ratchet Crimping Tool Crimps Insulated, Heat Shrink And Ferrule Terminals Onto 10-22 Awg Stranded Copper Wire, Adjustable Compound Action Design Puts More Crimping Power Into Each Squeeze, Four Interchangeable Dies With Multiple Cavities Are Specially Designed For Each Terminal Type For 10-22 Awg Terminals, Hard Plastic Carrying Case Keeps Tool And Crimping Dies Organized And Safe From Damage, Built-In Ratchet Ensures Full-Cycle Crimping For A Uniform Crimp Every Time, Dial Adjusts The Amount Of Force Applied To The Crimp, Dual-Material Molded Grips Provide Added Comfort

Category: Wire Crimping Tools

RAK 47030B REPLACEMENT BLADE FOR THE JUNIOR STRIPPER #47030

Category: Wire Strippers

Burndy; Hydraulic Crimping Tool; Hypress; Hand Operated, Dieless; Output Force:11 Ton; Weight: 15 Lb; Height: 3 In; Length: 23.20 In; Width: 74 In; For Use Onconductor: Copper Cable: 6 - 1000 Kcmil , Aluminium Cable: 6 - 750 Kcmil; Accessories: Wiremike Provides Quick And Easy Identification Of Commonly Used Conductors, Y644hscase Plastic Carrying Case; For Use On Terminals: Ya-l, Ya-2ln, Ya, Ya-fxb, Ya-2n, Ya-l-2tc, Ya-l-fx, Yab-4n, Ya-l-tc, Ya-2l, Ya-4n, Yev-p-fx, Ye-p, Ye-p-fx, Ya-a, Ya-a-tn; For Use On Splices: Ys-l, Ys, Ys-t, Ys-a; For Use On Pinadapter: Hyplug Ayp, Aypo

Category: Wire Crimping Tools

Replacement Blade for Model 2850

Category: Wire Crimping Dies, Adapters, & Blades

Crimps most Panduit #22 – 10 AWG nylon and vinyl insulated terminals, splices, and disconnects. The tool has the yellow pocket closest to the pivot which provides a reduced crimp effort for those who make yellow terminations.

Category: Wire Crimping Tools

M18™ 1" SS Jaw, Easy Opening Jaw Designed For One Handed Use, Designed For Use With Grinnell® Stainless Steel G-Press™ System, Compatible With M18™ Force Logic Press Tools (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

Replacement Blade for Cable End Stripper Model 2750

Category: Wire Crimping Dies, Adapters, & Blades

M18™ 1/2" SS Jaw, Easy Opening Jaw Designed for One Handed Use, Designed for Use With Grinnell® Stainless Steel G-Press™ System, Compatible with M18™ Force Logic Press Tools (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

M18™ 3/4" SS Jaw, Easy Opening Jaw Designed For One Handed Use, Designed For Use With Grinnell® Stainless Steel G-Press™ System, Compatible With M18™ Force Logic Press Tools (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

Stainless Steel W Die, Index 299

Category: Wire Crimping Dies, Adapters, & Blades

Burndy; Crimping Tool; Patriot; Battery Actuated, Hydraulic Self Contained; Weight: 10.9 Lb; Battery Type: Ni-mh; Battery Rated Capacity: 2.6 Amp-hr; Accessories: Pt208620 Lanyard, Wdietree W Die Holder, Bat18v Hi-capacity Replacement Battery, Patchgr18v (120 Vac) Charger; Recharge Time: Less Than 45 Mint; Covered Head: No; Battery Voltage: 18 V; Dieless: No; Number Of Conductors Accomidated (max): 8 Awg - 600 Kcmil Copper Stranded (ya, Ya-l,ys, Ys-l); 8 Awg - 350 Kcmil Flex;8 - 350 Kcmil Aluminum (ya-a And Ys-a); Die Accommodation: W Dies; Operating Pressure: 7800 Psi; Width: 3-1/2 In; Length: 14.5 In; Height: 13.75 In; Force Developed: 6 Ton; Operating Voltage: 18 Vdc

Category: Wire Crimping Tools

6-Piece Hip Kit, Includes: 6-Pocket Hip Pouch, Side Cutter Pliers, 25' Tape Measure, Utility Knife, 7-in-1 Twist-a-Nut Nut/Screwdriver, Wire Stripper (Capacity: 10-18 AWG)

Category: Wire Strippers

T&b 13456 250mcm Tbm5 Die

Category: Wire Crimping Dies, Adapters, & Blades

Ergonomic Hand Tool for Crimping AB, C Flag Terminals

Category: Wire Crimping Tools

SA-200 Adapter

Category: Wire Strippers

45504 Ideal For Field Installation Of Connectors As Well As Shop Use Die Sets Are Easily Interchangeable Using A Screwdriver

Category: Wire Crimping Tools

Crimping Tool Crimps Heat Shrink Terminals Onto 10-22 Awg Stranded Copper Wire, Adjustable Compound Action Design Puts More Crimping Power Into Each Squeeze, Three Crimping Cavities In One Tool: 22–16 Awg (Red), 16–14 Awg (Blue) And 12–10 Awg (Yellow) Terminals, Built-In Ratchet Ensures Full-Cycle Crimping For A Uniform Crimp Every Time, Unique Cavity Design Provides Consistent Crimp From Either Side Of The Tool, Dial Adjusts The Amount Of Force Applied To The Crimp, Dual-Material Molded Grips Provide Added Comfort

Category: Wire Crimping Tools

Wire Stripper, Bench Model, Capacity: Copper Wire, Strips 14 AWG

Category: Wire Strippers