"sb-500 electronics corporation"

FLU TPS FLEX 18-TF-II 100/500

PRESSURE MODULE 0 TO 500 (0 TO 35 BAR) (0 TO 3500 KPA)

DUAL SENSOR PRESSURE CALIBRATOR 36 PSIG 500 PSIG

PRESSURE MODULE 0 TO 500 (0 TO 35 BAR) (0 TO 3500 KPA)

FLU DSX-602-PRO 500 MHZ CABLE

PRESSURE GAUGE REFERNCE -12 TO 500 PSIG

METROLOGY WELL: Lightweight, portable, and fast Insert A, imperial misc. holes , 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics. Includes test leads, and 6-pin DIN connector for reference probe.

METROLOGY WELL: Lightweight, portable, and fast Insert B, imperial comparison holes, 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics.

Motor Drive Analyzer, 4 Channel, 500 MHz with Motor Shaft & Harmonics & Harmonics

Category: Voltage & Continuity Testers

FLU FPC1G-MDA-500-11 YR FLUKE

Replacement Probe Tips, 10 Count, For Use With Fluke 500 Series Battery Analyzers

Category: Electrical Tester Accessories

FLU FLUKE-750P07 PRESSURE MODULE 0 TO 500 (0 TO 35 BAR) (0 TO 3500 KPA)

Category: Process Meters

CO Levels Range: 0-1000 PPM, Resolution: 1 PPM, Accuracy: 5%, Battery Life: Approx 500 Hours, C50 CASE SOLD SEPARATELY.

Category: Electrical Testers

Fuse, Amperage Rating: 1AMP, Voltage Rating: 600V, Replacement fuses for Fluke DMMs are available in 440 mA, 500 mA, 630 mA, 1A, 2A, 3A, 11A, and 15A values

Category: Electrical Tester Accessories

FLU FLUKE-717-500G PRESSURE CALIBRATOR 500 PSIG

FLUKE DSX-602

36 PSIG, 5000 PSIG, Dual Sensor Pressure Calibrator. Pressure calibration and temperature measurement for custody transfer applications. The Fluke 721 Precision Pressure Calibrator with dual isolated pressure sensors is the ideal tool for gas custody transfer applications allowing you to take simultaneous static and differential pressure measurements with a single tool. The 721 can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).

FLUKE85RF FREQUENCY PROBE THE 85RF HIGH FREQUENCY PROBE IS DESIGNED TO CONVERT A DC VOLTMETER WITH A INPUT IMPEDA NCE OF 10M OHMS INTO A HIGH F REQUENCY (100 KHZ TO 500 MHZ) RF VOLTMETER. CONVERSION FRO M AC TO DC IS ACCOMPLISHED ON A ONE-TO-ONE BASIS INCLUDES A RANGE OF 0.25 TO 30 VRMS. T HE PROBE'S DC OUTPUT IS CALIB RATED TO BE EQUIVALENT TO THE RMS VALUE OF A SINE WAVE INP UT

717 Series Pressure Calibrator, Measuring Range: -12 to 30 PSI, Resolution: 0.001 PSI, Accuracy: 0.05 PCT For Full Scale, Plus/Minus 10 PCT Loop Power, Functions: Zero, Min, Max, Hold, Damp, Loop Power: 24 VDC, Maximum Voltage: 30 V, Power Source: 9 V Battery ANSI/NEDA 1604AáOr IEC 6LR619V Alkaline, Display: Clear 5 Digit LCD, Dimensions: 201 MM Length X 98 MM Width X 52 MM Height, Environmental Conditions: Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 60 DEG C, Humidity : 95 PCT, Operating Altitude: 3,000 MR Maximum, Shock And Vibration: Random, 2 G, 5-500 HZ 1 MR Drop Test, Weight: 22 OZ, CSA C22.2 No. 1010.11992, ANSI/ISA S82.02, IEC 61010-1 2nd Edition CAT I, 30 V, Complies with EN 61326 Class A EN61010-1