"nc-250 industries, llc"

4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 10, Wire Range: 250 MCM - 750 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

NSI HTGE-250 2 WAY BASKET 6 S

Category: Transformer Ground Clamps

NSI 250-3-Z-BULK .250 X .032

NSI HTSF16-250-3-P 16-14 AWG

Category: Female Non-Insulated Wire Disconnects

NSI F16-250-3V-S 16-14 AWG VI

Category: Female Vinyl Insulated Wire Disconnects

NSI HTM12-250-3 HI TEMP MALE

Category: Female Non-Insulated Wire Disconnects

Interval Timer, 60 Minute, White Twist Knob, 20 Amp, 250 Volt AC, with Hold, In-Wall Time Switch

Category: In-Wall Spring Wound Time Switches

Compression Lug, 250 - 500 MCM, 2 Hole, 1/2 Inch Stud, Aluminum, Pink Color Code

Category: 2-Hole Aluminum Compression Lugs

NSI IF16-250-3N-IG-S 16-14 .2

Category: Wire Disconnect Adapters

NSI F12-250-3V-BULK 12-10 AWG

Category: Female Vinyl Insulated Wire Disconnects

.250/125 Thin Wall Heat Shrink, 25 Ft Spool, Round, Polyolefin, 600 Volt, Black

Category: Thin Wall Heat Shrink

NSI IF16-250-3N-S 16-14 FULLY

Category: Wire Disconnect Adapters

StandardBarrel TinnedCopperSplice250MCM Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: Standard Barrel Copper Compression Sleeves

.250/.125 THIN SHRINK 6 INCH

Category: Thin Wall Heat Shrink

.250/125 Thin Wall Shrink, 500 Ft Spool, 600 Volt, Round, Polyolefin

Category: Thin Wall Heat Shrink

NSI CP250 250 MCM CABLE ENTRY

Category: Capped Bushings

insulatng Cover For Tap Connector Gp-250, Gp-250-0

12-10 AWG Nylon Insulated Flag, 50/Pack

Category: Wire Disconnect Adapters

NSI HTP16-250-3 HI TEMP MALE/

Category: Female Non-Insulated Wire Disconnects

NSI GP-250 250MCM PARALLEL TA

Category: Aluminum Tap Lugs

2 Port Aluminum Lug 250 MCM - 6 AWG Aluminum Double Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts, 90 degrees C. UL 486A/B Listed.

Category: 2-Conductor Aluminum Mechanical Lugs

NSI 250-3MFM .250 X .32 BARE

22-18 AWG, .250 x .030 Tab Nylon Fully Insulated, 50/Pack

Category: Wire Disconnect Adapters