"4/0tc industries, llc"

NSI 1024 225A 4-14 AWG 24 CIR

6 Wire Polaris 750-250 MCM Non-UL Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Non-UL Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Heavy Duty Silicon Bronze Ground Rod Clamp for 3/4in. Rod Heavy Duty Ground Rod Clamps are made from silicon bronze for maximum strength. A silicon bronze screw furnishes maximum clamping force. All standard duty and heavy duty ground clamps are UL Listed for direct burial in earth or concrete.

3 Port Aluminum Dual Rated Transformer Stud Connector 500 MCM - 4 AWG Aluminum dual rated transformer stud connectors are versatile and reusable set screw connectors made from 6061T-6 aluminum alloy for superior electrical and mechanical performance. Clear plated for low contact resistance- stud is tin plated copper which provides low contact resistance for connection to transformer. For use with copper and aluminum conductors. Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

NSI 2036 225A 4-14 AWG 32 CIR

NSI 1042 225A 4-14 AWG 42 CIR

NSI TCP4/0 BRONZE PLATED TAP

6 Wire Polaris 1/0-14 AWG Uninsulated Multi-Cable Connector Blocks Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

NSI L8N-142 #8 AWG MAX WIRE S

Mechanical Single-Indent Heavy Duty Lug Crimpers APPLICATIONS: Crimper is a manually operated single-indent compressor tool. It has a wire range of CU-250 MCM to 8 AWG AL-4/0 AWG to 8 AWG. It requires no dies.

NSI G-8 HEAVY DUTY BRONZE GRO

CU CMP LUG SHORT 2 AWG 1/4 BOLT-5/8 SPAC

2 Port Aluminum Dual Rated Transformer Lug 600 MCM - 2 AWG Aluminum Dual Rated Transformer Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600 Volts. Temperature Rating 90 degrees C.

Insulated Multi-Cable Connector Block for Fine Stranded Flexible Copper Conductors, Wire Entry One Side, 600V, Number of Ports: 10, Wire Range: 4 AWG - 14 AWG, Abrasion and Chemical Resistant. Rated for use with Copper Conductors.

Category: Single Sided Entry Wire Connector Blocks

Premium 070 Electrical Tape Red, 3/4" X 66 Ft, -18 to 105c, 7mil, 600v, UL CSA

Category: Color Coding Tape

NSI UC-102 GRD CONN. 1/2" ROD

NSI AL8-14 8 AWG ALUM COMPRES

NSI UC-132 GRD CONN. 2" 2/0-4

NSI 2036MB 225A 4-14 AWG 32 C

NSI 1024MB 225A 4-14 AWG 24 C

NSI 1030MB 225A 4-14 AWG 30 C

NSI G-79 BRONZE GROUND CLAMP

NSI CB75 CONDUIT BENDER FOR 3

NSI DRDTB-1 SINGLE POLE DISCO