"hdh-0315c5wht formula systems north america inc"

Plasti-Bond mogul style conduit bodies are offered in numerous configurations to provide a complete coated conduit system. Mogul BG Covers are sold separately. Mogul style fitting bodies have long openings and may be used to make bends in conduit runs, for pull outlets for stiff conductors, to provide additional room for taps or splices, etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

Fiber storage loop. Accepts two CM2 size Wiremold Open System communication modules or Pass and Seymour Activate Series inserts. Compatible with Wiremold 400, 800, and 2300 Series Raceways.

Category: 2-Gang Raceway Device Brackets & Plates

Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

For mounting deeper devices such as TVSS receptacles, GFCI devices, and Pass and Seymour Activate inserts. Accepts 5507 Series Faceplates, 2A size Activate inserts, and Open System communication modules. Bezels included. For faceplate options, see 5507 Series Faceplates. Black

Category: 2-Gang Raceway Device Brackets & Plates

HOF AST484R SPLITTER TROUGH 4

Category: NEMA 1 Wire Trough

HOF AST5603R SPLITTER TROUGH

Category: NEMA 1 Wire Trough

Inserts to replace the standard double-bit 3 mm insert in the standard lock cover. This Inserts, LI, LI527 item measures 16x16x20mm with a material of Zamak, Triangle 8mm.

Category: Enclosure Key Inserts

HOF AST2124R SPLITTER TROUGH

Category: NEMA 1 Wire Trough

HOF AST483R SPLITTER TROUGH 4

Category: NEMA 1 Wire Trough

Wide Range Distribution Grip, EHS Wire, EHS Jaw Holds A Wide Range Of Cable From 0.162-Inch To 0.883-Inch (4.11 to 22.42 mm), 50-Percent Lighter Than The KT4600 Grip, One-Handed Design Makes For Easier Actuation, Alternating Sawtooth Jaw Geometry Provides Greater Grip Strength, Spring Closes Grip On Cable To Hold The Initial Position, Large Opening In The Handle Accommodates A Wide Variety Of Hooks On Hoists, Winches And Tackle Blocks, Max Safe Load Of 5000-Pounds (2268 kg)

Category: Power Cable Systems - Distribution Grips

Protects against Knife Injuries on the Job, Cleanly Strips Cu RHW/RHH/USE Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

J-PRO Cable support system, with clip for use with #12 wire and threaded rod up to 3/8 (9.5mm) in diameter or 1/8 - 1/4 (3.2mm - 6.4mm), 2.00 (50.8mm) max. bundle capacity, nylon 6.6 with metal attachments, red, 50 pc. package quantity.

Category: J-Hook From Wire/Rod & Beam

Modular TDX Panel Protector, 100 kA, 240 VAC Un, 3Ph? 3W+G Distribution System

Category: Panel Mount Surge Protection Devices

Eaton, Molded case circuit breaker accessory, Handle mechanism, Series C: Handle Mechanisms, Through-the-Door Handle Mechanism, Rotary Handle, 24 in. Shaft, NEMA 1/3R/12, Used with K-Frame

Category: Molded Case Circuit Breaker Operating Mechanisms

LIQUID-TUFF™ UL Liquidtight Flexible Steel Conduit, 1-1/2 Inch Diameter, 50 Ft. Roll, White

Category: Liquidtight Flexible Metallic Conduit

C-h Eop5t07 Nd Motor Opr W/pi

Category: Molded Case Circuit Breaker Operating Mechanisms

Solar Label, FUEL CELL POWER SYSTEM LABEL, 4.12" X 2.0", VL, Orange, 10/pkg

Category: Solar Installation Labels

SLK15Y300L5 CABLE SUPPORT AIRCRAFT CABLE SUPPORT SYSTEM FOR LIGHT FIXTURES

Category: Speed Link

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

LIFT HANDLE

Category: Enclosure Handle Kits

PVC coated device boxes and covers, available in several configurations, may be used in coated conduit systems to accommodate wiring devices, to serve as pull boxes for conductors, or to allow for splices and taps in conductors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated FD Device Boxes