Search results

ROB-R PBPS100M 4 MALL 1 HOLE

Category: PVC Coated 1-Hole Conduit Straps

Plasti-bond Pulling Elbows Are Used At 90° Bends In Conduit Runs To Allowstraight Pulls At Bends, To Serve As Pull Outlets For Stiff Conductors, To Allowfor Service Entrance Into Buildings Or To Allow Conductor Entrance Into Motors.electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LB Conduit Bodies

Liquidtight Connector With Ground, Straight Angle, Size: 1 inch, Material: PVC Coated Steel.

Category: Straight PVC Coated Type LT Connectors

ROB PREYD76SA 2-1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRNIP-AL-1X2-1/2 1X2-1/2 AL NIPPLE

Category: PVC Coated Nipples

PVC Coated Malleable Elbow, 90°, Male to Female, Aluminum, 1/2 Inch

Category: 90 Degree PVC Coated Type LT Connectors

RRY PRC39 1 AL MARK 9 C FITTI

Category: PVC Coated Type C Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

RRY PREYD86 3 M/F SEALING FIT

Category: PVC Coated Type EYD Sealing Fittings

ROB PREL49 1-1/4 MALLEABLE 90 FEM/FEM ELBOW

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRLBD6600SA 2 AL PULLING ELBOW

Category: PVC Coated Type LB Conduit Bodies

ROB PRREC54SA 1-1/2 - 1-1/4 AL REDUCING COUPLING

Category: PVC Coated Couplings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PREYD86SA 3 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRNIP-AL-1X4 1X4 AL NIPPLE

Category: PVC Coated Nipples

ROB PR5237AL 2 STRAIGHT LT CONN AL

Category: Straight PVC Coated Type LT Connectors

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: Straight PVC Coated Type LT Connectors

ROB PBU-BOLT-3 3 COATED STEEL U-BOLT

Category: PVC Coated Conduit Support Straps

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type TB Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: Straight PVC Coated Type LT Connectors