Search results

ROB PRNIP-AL-2-1/2X6 2-1/2X6 AL NIPPLE

Category: PVC Coated Nipples

ROB PRLB789 2-1/2 AL MARK 9 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

ROB PRHNIP-3-1/2X4 3-1/2X4 NIPPLE

Category: PVC Coated Nipples

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

"Plasti-Bond reducing couplings are used to connect two pieces of conduit of different size. They are available in 17 different size combinations.

Category: PVC Coated Couplings

Plasti-Bond split couplings are used to connect two pieces of conduit where the conduit can't be turned because of limited clearance between runs or a wall or other obstruction.

Category: PVC Coated Split Couplings

ROB PRLR789 2-1/2 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

3/4 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRREC605SA 2 - 1-1/2 AL REDUCING COUPLING

Category: PVC Coated Couplings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PBU-BOLT-1/2 1/2 COATED STEEL U-BOLT

Category: PVC Coated Conduit Support Straps

ROB PRLBD5500SA 1-1/2 AL PULLING ELBOW

Category: PVC Coated Type LB Conduit Bodies

ROB PR690 2 MARK 9 COVER

Category: PVC Coated Conduit Body Covers

ROB PRNIP-AL-1X12 1X12 AL NIPPLE

Category: PVC Coated Nipples

ROB PRLBD9900 3-1/2 PULLING ELBOW LBD

Category: PVC Coated Type LB Conduit Bodies

ROB PR5235AL 1-1/4 STRAIGHT LT CONN AL

Category: Straight PVC Coated Type LT Connectors

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PR5234AL 1 STRAIGHT LT CONN AL

Category: Straight PVC Coated Type LT Connectors

PVC Coated Malleable Elbow, 90°, Male to Female, Aluminum, 3/4 Inch

Category: 45 Degree PVC Coated Type LT Connectors

Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage."

Category: Straight PVC Coated Type LT Connectors

ROB PRT39 1 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies

ROB PR5355GR 1-1/4 90 LT CONN W/GRND

Category: 90 Degree PVC Coated Type LT Connectors

ROB PR590 1-1/2 MARK 9 COVER

Category: PVC Coated Conduit Body Covers