Search results

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

ROB PBRA-3 3 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

ROB PR970SA 3-1/2 - 4 FORM 7 COVER

Category: PVC Coated Conduit Body Covers

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

Plasti-bond St Style Knockout Hubs Are Used To Terminate Conduit Runs Through The Wall Of A Sheet Metal Electrical Enclosure. They Are Available With Or Withoutgrounding Lug. Sttb Style Hubs Are "through-bulkhead" Fittings Used To Pass Conduit Runs Through Firewalls Or Bulkheads Up To 1/8" Thick. Stttb Style Hubs Perform The Same Function For Unlimited Wall Thicknesses, (furnished Without Nipples).

Category: PVC Coated Conduit Hubs

Rob-r Pbc149-3/4 3/4 Pipe Str

Category: PVC Coated Conduit Support Straps

Parallel Beam Clamp, 1-1/4 Inch, Material: Ferrous Metal, PVC Coated

Category: PVC Coated Parallel Beam Clamps

Liquidtight Connector, 45° Angle, Size: 1-1/4 inch, Material: PVC Coated Steel.

Category: 45 Degree PVC Coated Type LT Connectors

Robroy 1 1/4" Pvc Coated Alum couplings

Category: PVC Coated Couplings

Rob-r Preyd2 3/4 F/f Sealing

Category: PVC Coated Type EYD Sealing Fittings

ROB PREL39 1 MALLEABLE 90 FEM/FEM

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRHNIP-1X2-1/2 1X2-1/2 NIPPLE

Category: PVC Coated Nipples

ROB PRHNIP-3XCL 3XCLOSE NIPPLE

Category: PVC Coated Nipples

Rry Prel296 3/4" Mall. 90deg fem/fem Elbow

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRHNIP-2-1/2X5 2-1/2X5 NIPPLE

Category: PVC Coated Nipples

Plasti-Bond PVC coated strut nuts are used to assemble strut components and to secure coated all thread rod in a section of strut. These are available with or without a spring to aid in placement and assembly.

Category: PVC Coated Beam Clamps

ROB PREYD36 1 M/F SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRSSP500 5 SPLIT COUPLING

Category: PVC Coated Split Couplings

Rry Prbub3 1" Mogul Bub conduit Fitting

Category: PVC Coated Conduit Body Covers

ROB PRHNIP-1-1/4X2-1/2 1-1/4X2-1/2 NIPPLE

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Rob-r Prlbd8800 3 Pulling Elb

Category: PVC Coated Type LB Conduit Bodies

Conduit Body, Type: TB, FM7, Size: 1-1/4 Inch, Material: PVC Coated Iron.

Category: PVC Coated Type TB Conduit Bodies