Search results

Rob-r Prlbd10900 4 Pulling El

Category: PVC Coated Type LB Conduit Bodies

Rob-r Pr5339gr 3 Straight Lt

Category: Straight PVC Coated Type LT Connectors

Rob-r Pbc149-1-1/4 1-1/4 Pipe

Category: PVC Coated Conduit Support Straps

Plasti-Bond PVC coated pipe straps are used to securely mount conduit to a wall or other structure for support. They are available in two styles: a one-hole malleable iron strap or a two-hole stamped steel strap. Mounting hardware not provided.

Category: PVC Coated 2-Hole Conduit Straps

Plasti-Bond LBY type elbows are used as service entrance elbows between service entrance and vertical weatherhead conduit runs, to change direction of a conduit run 90degree when space is limited, and for pull outlets. They are available for general service (Series LBY-50-GS through LBY-150-GS) and hazardous (Series LBY-50 through LBY-55) locations.

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prlr1089 4 Al Mark 9 Lr

Category: PVC Coated Type LR Conduit Bodies

Rob-r Prc78 2-1/2 Form 8 C Fi

Category: PVC Coated Type C Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Rob-r Prxjg74 2-1/2 Expansion

Category: PVC Coated Expansion Couplings

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRC789 2-1/2 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies

ROB PRLL29 3/4 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRNIP-AL-1-1/2XCL 1-1/2XCLOSE AL NIPPLE

Category: PVC Coated Nipples

ROB PBPS99M 3-1/2 MALL 1 HOLE PIPE STRAP

Category: PVC Coated 1-Hole Conduit Straps

Plasti-Bond mogul style conduit bodies are offered in numerous configurations to provide a complete coated conduit system. Mogul BG Covers are sold separately. Mogul style fitting bodies have long openings and may be used to make bends in conduit runs, for pull outlets for stiff conductors, to provide additional room for taps or splices, etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

ROB PBC149-3-1/2 3-1/2 PIPE STRAP

Category: PVC Coated Conduit Support Straps

ROB PBRA-3-1/2 3-1/2 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

ROB PRHNIP-1-1/4X10 1-1/4X10 NIPPLE

Category: PVC Coated Nipples

ROB PREYD36SA 1 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRREC42SA 1-1/4 - 3/4 AL REDUCING COUPLING

Category: PVC Coated Couplings

PVC Coated Malleable Elbow, 90°, Male to Female, Aluminum, 1 Inch

Category: 90 Degree PVC Coated Type LT Connectors