Search results

ROB PRNIP-AL-2X3 2X3 AL NIPPLE

Category: PVC Coated Nipples

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PREL395 1 MALLEABLE 90

Category: 90 Degree PVC Coated Type LT Connectors

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

Conduit Body, Type: LB, FM8, Size: 3 1/2 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

ROB PRREC32SA 1 - 3/4 AL REDUCING COUPLING

Category: PVC Coated Couplings

Plasti-Bond PVC coated pipe straps are used to securely mount conduit to a wall or other structure for support. They are available in two styles: a one-hole malleable iron strap or a two-hole stamped steel strap. Mounting hardware not provided.

Category: PVC Coated 2-Hole Conduit Straps

Female/Male Union, Size: 3-1/2 inch, Material: PVC Coated Steel.

Category: PVC Coated Female-Male Unions

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 45 Degree PVC Coated Type LT Connectors

ROB PR880F 2-1/2 - 3 FORM 8 COVER

Category: PVC Coated Conduit Body Covers

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: Straight PVC Coated Type LT Connectors

ROB PBU-BOLT-3 3 COATED STEEL U-BOLT

Category: PVC Coated Conduit Support Straps

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type TB Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: Straight PVC Coated Type LT Connectors

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRNIP-AL-1X2-1/2 1X2-1/2 AL NIPPLE

Category: PVC Coated Nipples

PVC Coated Malleable Elbow, 90°, Male to Female, Aluminum, 1/2 Inch

Category: 90 Degree PVC Coated Type LT Connectors

RRY PRC39 1 AL MARK 9 C FITTI

Category: PVC Coated Type C Conduit Bodies

ROB PREL49 1-1/4 MALLEABLE 90 FEM/FEM ELBOW

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRLBD6600SA 2 AL PULLING ELBOW

Category: PVC Coated Type LB Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples