Search results

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PBRA-3 3 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

ROB PRHNIP-3-1/2X5 3-1/2X5 NIPPLE

Category: PVC Coated Nipples

ROB PR5232GRAL 1/2 STRAIGHT LT CONN W/ GRN AL

Category: Straight PVC Coated Type LT Connectors

ROB PRC49 1-1/4 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies

ROB PRSSP500 5 SPLIT COUPLING

Category: PVC Coated Split Couplings

ROB PRLR97SA 3-1/2 AL FORM 7 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

ROB PRHNIP-1-1/2X10 1-1/2X10 NIPPLE

Category: PVC Coated Nipples

Liquidtight Connector, 90° Angle, Size: 3 inch, Material: PVC Coated Steel.

Category: 90 Degree PVC Coated Type LT Connectors

Rob-r Prssp125 1-1/4 Split Co

Category: PVC Coated Split Couplings

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Robroy 1 1/4" Pvc Coated Alum couplings

Category: PVC Coated Couplings

Plasti-Bond PVC coated strut nuts are used to assemble strut components and to secure coated all thread rod in a section of strut. These are available with or without a spring to aid in placement and assembly.

Category: PVC Coated Beam Clamps

Rob-r Prlbd8800 3 Pulling Elb

Category: PVC Coated Type LB Conduit Bodies

ROB PREYD36 1 M/F SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

Close Nipple, 1/2 inch, Material: PVC Coated Steel.

Category: PVC Coated Nipples

Conduit Body, Type: TB, FM7, Size: 1-1/4 Inch, Material: PVC Coated Iron.

Category: PVC Coated Type TB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

ROB PRHNIP-2-1/2X8 2-1/2X8 NIPPLE

Category: PVC Coated Nipples

1-1/4 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

1-1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

Rry Prbub3 1" Mogul Bub conduit Fitting

Category: PVC Coated Conduit Body Covers

Rob-r Prhnip-1x8 1x8 Nipple

Category: PVC Coated Nipples