Search results

RRY PREYD16 1/2 M/F SEALING F

Category: PVC Coated Type EYD Sealing Fittings

Liquidtight Connector, Straight Angle, Size: 3 inch, Material: PVC Coated Steel.

Category: Straight PVC Coated Type LT Connectors

Rob-r Prsta6 2 Al Knockout Hub

Category: PVC Coated Conduit Hubs

Rob-r Prt107 4 Form 7 T Fitti

Category: PVC Coated Conduit Hubs

Rry Pbc212 21/2" Pb Strap

Category: PVC Coated Conduit Support Straps

1-1/4 Form 7 Cover

Category: PVC Coated Conduit Body Covers

ROB-R PRCPLG-AL-2-1/2 2-1/2 A

Category: PVC Coated Couplings

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

NIPPLE GALVANIZED RIGID PVC COATED 4X6

Category: PVC Coated Nipples

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type C Conduit Bodies

ROB PRLR29 3/4 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PR5257AL 2 90 LIQUID TIGHT CONN AL

Category: 90 Degree PVC Coated Type LT Connectors

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

ROB PRNIP-AL-1/2X8 1/2X8 AL NIPPLE

Category: PVC Coated Nipples

ROB PR5240GRAL 4 STRAIGHT LT CONN W/GRN AL

Category: Straight PVC Coated Type LT Connectors

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

ROB PRNIP-AL-1/2X2 1/2X2 AL NIPPLE

Category: PVC Coated Nipples

ROB PRT19 1/2 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies

Plasti-Bond reducing couplings are used to connect two pieces of conduit of different size. They are available in 17 different size combinations."

Category: PVC Coated Couplings

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Parallel : to attach the conduit run parallel to a beam or structural member.

Category: PVC Coated Parallel Beam Clamps

ROB PR5256AL 1-1/2 90 LT CONN AL

Category: 90 Degree PVC Coated Type LT Connectors

ROB PR5341GR 3/8 45 LT CONN W/GRND

Category: 45 Degree PVC Coated Type LT Connectors