"nch-500"

NSI AM-R1-H12-NCA (1) 500 MCM

NSI AM-R1-R1-NCA (1) 500 MCM

3 Port Panelboard Lug 1000 MCM - 500 MCM Panelboard style for multi-conductor with NEMA mounting hole spacing for turn prevent and secureness. Made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Rated 600 volts (2000V max per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.750".

NSI AL-R2-K6-NCA (2) 500 MCM

NSI AL-R1-M4-NCA (1) 500 MCM

NSI IPLD500-6CB POLARIS VISIO

12-10 AWG Nylon Insulated Butt Splice, 500 Per Pack

NSI R8-10N-BULK 8 AWG NYLON I

NSI R12-8N-BULK 12-10 AWG NYL

NSI TS500-4 500-4 4 CONDUCTOR

NSI 8-1000LL12 LUG 1000 MCM-5

1 HoleStandard BarrelAluminum Compression Lug500MCM -5/8 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

12-10 AWG Vinyl Insulated Ring 5/16" Stud - 500 Per Pack

12-10 AWG Bare Ring 1/2" Stud, 500 Per Pack

1 HoleLong Barrel Copper Compression Lug for Flexible Copper Cable500 MCM- 5/8" Bolt Compression lugs for flexible copper cables are connects that have a gentle, continuous flared end to ensure ease of cable insertion of flexible and extra flexible cables such as locomotive, welding, mining cable and more. The flared end also reduces pressure on the cable strands after installation and protects them from chafing and breakage as a result of cable movement. Tin-plated for corrosion resistance. Rated 600 volts for copper cables only. Single mounting hole.

NSI IPLMD600-4

Category: Single Sided Entry Wire Connector Blocks

Cable Clamp Black .5x.375" 100

Category: Cable Straps

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

NSI IPLMD600-8 600 MCM - 6 AW

Category: Single Sided Entry Wire Connector Blocks

Winged Wire Connector, Blue, Easy Twist, 14-6 AWG, Fibre Drum of 9,500

Category: Color Coded Twist On Wire Connectors

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 3, Wire Range: 600 MCM - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

NSI1000LL2 1000-500 LUG

Category: Aluminum Panelboard Lugs

NSI IPLMD600-5 600-6 POLARIS INS MULTI-TAP CONN 5 PORT

NPDB LINE 1X500-4 - LOAD 12X4-14