"4-600l4 industries, llc"

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 4 AWG - 1/4" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

Offset Pin Terminal 4/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

Insulated Multi-Cable Connector Block for Fine Stranded Flexible Copper Conductors, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 14 AWG - 6 AWG, Abrasion and Chemical Resistant. Rated for use with Copper Conductors.

Category: Single Sided Entry Wire Connector Blocks

4 Port Aluminum Dual Rated Transformer Connector 500 MCM - 4 AWG Transformer Connectors are made from 6061T-6 aluminum alloy. They are electro-tin plated for low contact resistance. Two NEMA 1/2" holes for easy attachment. Rated 600 volts.

Category: Transformer Lug Kits

Insulated Multi-Cable Connector Block for Fine Stranded Flexible Copper Conductors, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 10 AWG - 1 AWG, Abrasion and Chemical Resistant. Rated for use with Copper Conductors.

Category: Single Sided Entry Wire Connector Blocks

Polaris™ Insulated Multi-Tap Connector, 5 Port (Dual Sided Entry), 500 MCM - 4 AWG, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Aluminum Ground Clamps for 2.5-4in. Pipe Dual-rated ground clamp that ground aluminum or copper to water pipe, galvanized pipe or steel conduit. They are constructed from high-strength extruded aluminum alloy and are plated to provide low-contract resistance. cULus Listed 467 Grounding and Bonding. Zinc plated steel screws.

Category: Bare Wire Ground Clamps

4 Port Aluminum Dual Rated Transformer Lug 350 MCM - 6 AWG Aluminum Dual Rated Transformer Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600 Volts. Temperature Rating 90 degrees C.

Category: Transformer Lug Kits

Lay In Connector 4 - 14 AWG Lay-in connectors offer the ultimate in flexibility. Excellent for grounding and continuous loop applications. Made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C.

Category: Aluminum Lay-In Lugs

NSI EWG-7060-9 GENERAL PURPOSE *** Discontinued ***

Category: Color Coding Tape

Power Distribution Block, Large, Black, 600V, (1) 500 MCM-4 AWG (Line) - (6) 2/0-14 AWG (Load), Aluminum Body - Glass-Filled Polyester Base

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

6 AWG Bare Ring 1/4" Stud - 15 Per Pack

Category: Non-Insulated Ring Tongues

Power Distribution Block, Small, (2) 2/0-14 AWG Primary (6) 4-14 AWG Secondary

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

NSI KA12-4 U-TYPE DIE #4 AWG

Category: Wire Crimping Dies, Adapters, & Blades

Insulated Multi-Cable Connector Block for Fine Stranded Flexible Copper Conductors, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 1/0 AWG - 14 AWG, Abrasion and Chemical Resistant. Rated for use with Copper Conductors.

Category: Single Sided Entry Wire Connector Blocks

Insulated Multi-Cable Stacked Connector Block, Wire Entry Either Side, 600V, Number of Ports: 8, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Polaris Vision Tap™ Insulated Tap Connector, Off-Set (Dual Sided Entry), 4-14 AWG, 2 Conductors, 600V, Clear, Plastisol

Category: Single Sided Entry Wire Connector Blocks

Professional Vinyl Electrical Tape, 3/4 Inch x 60 Feet, Yellow, Flame-Retardant, UV Resistant

Category: Color Coding Tape

Push-In Wire Connectors 22-12 AWG - Clear Bag - 4 Wire APPLICATIONS: Fast, safe and reliable installation saves time and money. No twisting or taping of conductors required. Just strip the wire, insert the connector and you are done. One wire per opening ensures loose connections are eliminated. Made of strong, UL 94V-2 flame retardant polycarbonate. Integrated test port enables continuity testing. Color coded for easy identification. Compact design perfect for tight spaces. Copper, tin-plated- Stainless steel spring- Steel frame, zinc-plated. UL 486C Listed Wire Connector. Accommodates 22-12 AWG solid or stranded copper wire

Category: 4-Port Push-In Wire Connectors

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 10, Wire Range: 14 AWG - 4 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

4 AWG Nylon Insulated Ring 1/4" Stud, 15 Per Pack

Category: Nylon Insulated Ring Tongues

NSI SC-4/0B COPPER TIN PLATED

Category: Short Barrel Copper Compression Sleeves

NSI KC12-4 U-TYPE DIE #4 AWG

Category: Wire Crimping Dies, Adapters, & Blades

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 3, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks