"ab-1010teg the austin co."

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 5/

Category: Heat Cable Brackets & Clips

Conduit entrance end fitting. This power rated two-piece fitting is designed to accommodate the entrance of 1/2" conduit or align with knockouts on surface mount electrical boxes. For use with LD3/LDPH3 and has breakouts available to work with LD5/LDPH5 a

Category: 2-Piece Non-Metallic Raceway End Fittings

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in red premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.84" (21.3 mm

Category: Female Nylon Insulated Wire Disconnects

CRC 05610 MASS AIR FLOW SENSO

Category: Engine Cleaner

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Heat Stabilized Nylon 6.6 materi

Category: Non-Releasable Cable Ties

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Heat Stabilized Nylon 6.6 materi

Category: Non-Releasable Cable Ties

Unique viscous formula clings to the surface to break down tough grease & oil and remove stubborn scum line and rust stains. Bold, blue-green color makes it easy to see where product has been applied.

Category: Cleaning Supplies

CRC 14162 SMARTWASHER SW-37 P

Category: Cleaning Supplies

Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod

Category: Brackets

CRC 06161 MARINE FUEL STABILI

Category: Fuel Stabilizers

CRC SL3120 BOAT TRAIL/4X4 WHE

Category: Multi-Purpose Lubricant

The original brake parts cleaner. Formulated to quickly & effectively remove grease, brake dust, brake fluids, oils, & other contaminants from brake parts, lining, pads. *** Not For Sale in CA, NJ ***

Category: Brake Parts Cleaner

The vibration resistant male tab disconnect is made of brass and is nickel-plated. It is fully insulated in a red, nylon oversized housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.91

Category: Male Nylon Insulated Wire Disconnects

The Panduit IN-Cabinet Vertical Cable Manager is designed to route, manage and organize cables between equipment with enough flexibility to fit seamlessly into almost any wide cabinet design. Front mount bracket, single sided, PVC, 40RU, Black, 1pc + snap

Category: Rack Cable Management Devices

The vibration resistant male disconnect is made of brass and is nickel-plated. It is fully insulated in blue premium nylon oversized housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.

Category: Male Nylon Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, nylon standard receptacle housing and has an expanded wire entry area for wires with large outside diameters. It has a tab size of 0.187/0.205 x

Category: Female Nylon Insulated Wire Disconnects

The epoxy applied cable tie swivel mount in natural is affixed with user supplied EMA epoxy. It is 1.13" long x 1.13" wide (28.7 x 28.7 mm) and has an aluminum base and a nylon mount. It is used with miniature, intermediate, and standard cable ties. It is

Category: Cable Tie Bases

#6 AWG (16mm²) jumper for armored cable diameter 0.94 (23.9mm) to 1.5 (38.1mm); 24 (609.6mm) length; factory terminated on one end with LCC6 two-hole copper compression lug and the other end with grounding terminal; provided with two each #12-24 and M6 th

Category: Bonding Jumpers

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in blue vinyl housing. It has a tab size of 0.187 x 0.02" (4.8 x 0.5 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.79" (20.1 mm) long

Category: Female Vinyl Insulated Wire Disconnects

Optional cover for the outside vertical 45° angle fitting FROV4524X4BL. Snap-on feature allows cover to be installed and removed with no tools required.

Category: 2-Piece Non-Metallic Raceway Covers

The 4-way mount in white is applied with user-supplied adhesive or a #6 (M3) screw and measures 1" x 1" (25.4 mm x 25.4 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor e

Category: Cable Tie Bases

Our Cardstock Lockout Tags Are A Cost-effective Option For Single Use Applications. Cardstock Tags Do Not Meet Osha's 50 Lb Pull Test For Tagout Devices, But Can Be Used In Conjunction With Locks To Enhance Visual Awareness. The 3/8 Diameter Brass Eyele

Category: Lockout Tags

Tamper resistant screws are designed to prevent vandalism and theft. Use proper bit or driver to remove (one way, hex pin, star pin or spanner). Choose from the type head style available: Button or Flat.

Category: Spanner Tamper Proof Machine Screws