"ab-b1npb the austin co."

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

Super-Grip® Cable Ties are designed with high strength and flexibility to tightly grip bundles and resist lateral movement despite the rough conditions of MRO and construction environments. Plus, with weather-resistant Nylon 6.6 material, it's ideal for i

Category: Non-Releasable Cable Ties

Braided Expandable Sleeving, 0.50" diameter (12.7mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, gray, Polyethylene Terephthalate, 100 ft. per reel.

Category: Braided Expandable Sleeving

The cable tie tool in red installs standard, heavy-standard, light-heavy, and heavy cross-section cable ties. It is an inexpensive, maintenance-free, all-purpose tool with an ergonomic handle design and short handle span. It also features a top-loading fe

Category: Cable Tie Tools

Braided Expandable Sleeving, 2.50" diameter (63.5mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

The pan-post standoff is black and requires a #10 (M5) screw. It measures 1.06" long x 0.72" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 100.

Category: Cable Tie Bases

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Red, 3 meters.

Category: Category 6 Patch Cords

2-1/2" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

4" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP3235 item fits 320x350mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Back Panels

The cable identification sleeve in yellow is for 2mm simplex cable with labels S100X150YAJ (laser/inkjet), S100X150VAC (LS8E handheld printer), and S100X150VA1Y or S100X150VATY (thermal transfer printer). It is 1" long and made of flexible PVC. It comes i

Category: Clip-On Wire Markers

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Parallel : to attach the conduit run parallel to a beam or structural member.

Category: PVC Coated Parallel Beam Clamps

Front hinge to box 20" front for surfuce mounted ReliaGear lightings panel applications. Front hinged to box is similar to door-in-door forconvenient access to gutters, but more economically priced. A contractor must remove four screws to access the outer door.

Category: Panelboard Trims

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 85B3873

Category: 40 - 45 KVA Dry Type Transformers

Knee Pads With Non-Marring Shell Material To Prevent Scarring And Marking On Finished Surfaces, Slip-Resistant Caps Grip Kneeling Surface For Enhanced Stability And Balance, Gel And Eva Foam Padding Design Provides Lightweight Comfort And Protection During Extended Use, Top Strap Is Elastic; Bottom Strap Is Webbed, Perfect For Indoor Work On Finished Flooring And Sensitive Surfaces To Prevent Scarring Or Marking On Surfaces, Designed For Professional Men And Women In Trades That Require Work On Or Near The Ground, Sold In Pairs And One Size Fits All

Category: Knee Pads

Meter Stack, 200 Amp, 4 Jaw, 1-Phase, 120/240 Volt AC, 2 Sockets, Ringless, 400 Amp Buss, UG Service Only, NEMA 3R, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

The R200X225V1T Thermal Transfer Turn-Tell Label has an innovative design that allows it to rotate to any angle for improved visibility, aesthetics, and repositioning on wires/cables. It can easily be installed on existing terminated wires/assemblies and does not require disconnecting wires/cables. Use with Easy-Mark Plus Labeling Software and TDP printers. 2.0" x 2.25" (50.8 mm x 57.2 mm). Color White. 1000 labels.

Category: Repositionable Labels

The extra heavy cable tie mount in green is applied with a #10 (M5) screw. It is made of polypropylene for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Main lug load centers can be used as a home's main panel or sub panel depending upon your preferences. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TL240RCU features space for 2, 1" breakers, 40 A bus ampere rating, and an outdoor suitable enclosure.

Category: 1-Phase Main Lug Aluminum Bus Load Centers

Appleton STB Series Straight Liquidtight Connector With Wire Mesh Strain Relief, Size: 3 IN, Material: Malleable Iron, Finish: Chromate, Epoxy Powder Coat/Zinc Electroplated, Insulation: Insulated Throat, Dimensions: 3.69 IN Length X 4.38 IN Height, Thread Length: 1.19 IN, Outside Diameter: 3.46 - 3.5 IN, Standard: Class I, Division 2, UL 514B, E14814, CSA C22.2 No. 18.3, 065178, NEMA FB-1, For Liquidtight Flexible Metal Conduit To Threaded Hubs

Category: Liquidtight Strain-Relief Grips with Mesh

CIR 2007CD MTR SKT 200A 7 PT, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

CUT 3MM420RRL 3 PHASE RINGLESS, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

CUT 1MM420RRLB 1 PHASE RINGLESS, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

Single-gang device plate that accepts standard 20A duplex receptacle or a duplex Turnlok receptacle. Fits in any one (1) of the shaded locations shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings