"49-16-2451c"

3M FP-301VW-1/16-BLACK-1000'

Category: Thin Wall Heat Shrink

2p Female Straight20' 16/2 Awg Pvc Cord

Category: 2-Pin Cordsets

Milwaukee; Drill Bit; 44 Magnum; Bit Diameter: 1/4 In; Overall Length: 16 In; Drill Size: 14 In Depth; Shank Type: Sds; Number Of Flutes: 4; Material: Carbide Tipped

Category: SDS Masonry Bits

Ring Tongues, Wire Range: 16 - 14, Stud Size: 1/4, Color: Metallic, 1000/PK

Category: Non-Insulated Ring Tongues

UTILITY POLE BRACKET, 16-IN. WIDTH, HOT DIP GALVANIZED

Category: Strut Channel Brackets

Service Entrance Head, Type Clamp-On, Trade Size 1 Inch, Number of Holes 5, Hole Size (2) 7/16 Inch/(3) 1/2 Inch, Size 3-3/4 Inch L x 2-11/16 Inch W x 3-1/2 Inch H, Material Hot Dip/Mechanically Galvanized Malleable Iron, Approval UL 514B, Used On EMT/Rigid Conduit/IMC Service Entrance, Insulation Material Phenolic, Inclusion Brass Screw

Category: Service Entrance Caps - Metallic

Am-R Series Fiberglass Wall Mount Enclosure Assembly with Raised 4-Screw Lift-Off Cover, 18 x 16 x 8 Inch

Category: Fiberglass Hinged Cover Enclosures

Beam clamp for 5/16" - 1/2" flange with 1/2" - 3/4" snap closed conduit clip, side mount, static load capacity: 25 lbs. vertically.

Category: Conduit Hangers From Wire/Rod & Beam

2 POLE 16 AMP DISCONNECTOR SWITCH

Category: Panel Mount Non-Fusible Disconnect Switches

Netkey copper patch cord, category 6, 16 ft., black UTP cable.

Category: Category 6 Patch Cords

Eaton B-Line series acoustical tee and t-bar fasteners, Acoustical tee, 1" Height, 1" Length, 1" Width, 0.024lbs, 0.63", 0.94" Twist fasteners, 25 lbs load capacity

Category: Acoustical T-Grid Ceiling Twist On Fixture Supports

Clay Spade, Dianmeter: 4-1/2", Length: 16-3/4"

Category: Spade Bits

Gre6451316 kwik Change Ss Hole Cutter

Category: Carbide Tipped Hole Saws

3P FEMALE STRAIGHT12' 16/3 AWG PVC CORD

Category: 3-Pin Cordsets

Pin Terminals, Wire Range: 16 - 14, Color: Metallic, 100/PK

Category: Non-Insulated Pin Terminals

Eaton B-Line series datacomm and low voltage support fasteners, Cable to beam fastener, Beam mount, 5/16" Min flange thickness, 1/2" Max flange thickness, 3/4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel, U series

Category: J-Hook From Wire/Rod & Beam

Square Washer, 7/16 Inch Bolt Hole, 316 Stainless Steel, For Use With 1-5/8 Inch x 1-5/8 Inch Strut

Category: Strut Channel Washers

Eaton B-Line series Type 3/3R junction boxes, 16" height, 6" length, 16" width, NEMA 3 and 12, Screw cover, SCG enclosure, Surface mounted, Small single door, No mounting provisions, Galvanized steel, Oil-resistant gasket, gasketed screws

Category: NEMA 3R Screw Cover Enclosures

DOT QS3630LS LITE STICK

Category: Hot Sticks

MIL 48-20-7514 4 FLUTE 3/16 X

Category: SDS Masonry Bits

Eaton B-Line series beam clamp assembly, 3.3750"Hx6"Lx8.8750"W, 3/8"-16 rod size, 3/8"-16 screw size, 1"beam thickness, 8.875"beam width

Category: Strut-to-Beam Clamps

Eaton B-Line series C-clamp, 1.6250"Hx2"Lx0.8750"W, Malleable iron, 560 load cap, 3/8”-16 rod size, 0.25"beam width, Wedge c-clamp

Category: Beam Clamps - Reversible

Liquidtight Flexible Conduit Connector and Wire Mesh, Trade Size 2 Inch, Connector Type Straight Male, Connector Material Zinc Electroplated Malleable Iron, Throat Type Insulated, Mesh Type Single Weave, Mesh Length 7 Inch, Mesh Material Stainless Steel, Approval UL 514B, CSA C22.2, Used On Liquidtight Flexible Metal Conduit, Applicable Standard NEMA FB-1, W-F-406E, Includes Locknut, Sealing Ring, Zinc Electroplated Steel Ferrule, Size 3-3/16 Inch Dia x 10-11/16 Inch L, Thread Length 3/4 Inch, Application Hazardous Location

Category: Malleable Iron Liquidtight Flex Connectors

Ring Tongues, Wire Range: 4, Stud Size: 5/16, Color: Metallic, 200/PK

Category: Non-Insulated Ring Tongues