"5608-12-a electronics corporation"

FLU 5627A-12-A PROBE RTD INDU

FLU 5618B-12-A PROBE SECON. P

Voltage Probe Set, 600/1000 VAC, 300 MHz, 10:1, 1.2 m L

METROLOGY WELL: Lightweight, portable, and fast Insert A, imperial misc. holes , 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics. Includes test leads, and 6-pin DIN connector for reference probe.

MMMI17XXFLEX1500 3 PACK IFLEX THE FLUKE 17XX 12 INCH IFLEX FLEXIBLE CURRENT PROBES EXPAND THE MEASUREMENT RANGE OF THE FLUKE 17XX ENERGY OR POWER LOGGER TO 1500 A AC WHILE PROVIDING ULTIMATE MEASURMENT FLEXIBILITY THE IFLEX PROBES CONNECT DIRE CTLY TO THE LOGGER DISPLAYING CURRENT MEASUREMENTS WITHOUT ERROR PRONE SCALING FACTORS FLUKE 17XX IFLEX CABLES ARE AVAILABLE IN 12 24 AND 36 INCH 3 PACK

Category: Power Quality Analyzers

Clamp Meter, Maximum Rating: 600V AC/DC , Features: True-RMS, Current, Resistance, Capacitance, Includes: Soft Carrying Case

Category: AC / DC Clamp Meters

Has a temperature range of 35 degrees Celsius to 350 degrees Celsius, and it reaches its maximum temperature in 12 minutes.At six pounds, it’s small enough to easily carry in one hand. It’s truly a unique innovation in dry-wells.

AC Current Clamp 24 in, Model: i3000, Amperage Rating: 30/300/3000 AMP, Voltage Rating: 600 VRMS/VDC, Frequency Rating: 10 HZ - 50 KHZ (-3 DB), Measuring Range: 30 - 3000 AMP, 1/10/100 MILV/AMP Output, Operating Temperature: -20 To 90 DEG C (Head), -20 To 85 DEG C (Electronics), Impedance: 100 KOHM Minimum, Battery: (2) AA/MN 1500/LR6 Alkaline, Accuracy: 25 DEG C, Plus/Minus 1 PCT Of Range 45 - 65 HZ, Storage Temperature: -40 To 105 DEG C (Head), -20 To 85 DEG C (Electronics), CAT III 600 V, BS EN 61010-1: 2001, BS EN 61010-2-032: 2002, BS EN 61010-031: 2002, EN 61326: 1998 And A1, A2 And A3, For Use With Multimeters, Recorders Or Data Loggers

Soft Case for DMMs, Features: Zippered Carrying Case, Inside Pocket, Belt Loop

Category: Meter / Phone Holders

FLU 9100S-A-156 DRY-WELL H&HE

NFC-KIT-CASE-E Enhanced Fiber Optic Cleaning Kit - Includes a OneClick 1.25mm cleaner, a OneClick 2.5mm cleaner, a OneClick MPO cleaner, a solvent pen, a cleaning cube and a softcase

Category: Fiber Termination Accessories

Pressure Test Gauge, -12 psi to 100 psi

Category: Process Meters

Covers below-ambient temperatures as low as –25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert D has three pairs of metric sized wells.

717 Series Pressure Calibrator, Measuring Range: -12 to 30 PSI, Resolution: 0.001 PSI, Accuracy: 0.05 PCT For Full Scale, Plus/Minus 10 PCT Loop Power, Functions: Zero, Min, Max, Hold, Damp, Loop Power: 24 VDC, Maximum Voltage: 30 V, Power Source: 9 V Battery ANSI/NEDA 1604AáOr IEC 6LR619V Alkaline, Display: Clear 5 Digit LCD, Dimensions: 201 MM Length X 98 MM Width X 52 MM Height, Environmental Conditions: Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 60 DEG C, Humidity : 95 PCT, Operating Altitude: 3,000 MR Maximum, Shock And Vibration: Random, 2 G, 5-500 HZ 1 MR Drop Test, Weight: 22 OZ, CSA C22.2 No. 1010.11992, ANSI/ISA S82.02, IEC 61010-1 2nd Edition CAT I, 30 V, Complies with EN 61326 Class A EN61010-1

The Fluke 717 Pressure Calibrators deliver outstanding performance, durability and reliability. These calibrators are compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 717's are easy to use. Calibrator -12 to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.4 kPa ). Includes protective yellow Holster with test lead storage, instruction sheet, single 9V alkaline battery, test leads and alligator clips, NIST-traceable calibration report and data.

Type K, Thermocouple Adapter, Permits K-type Thermocouples And Temperature Probes To Be Connected To The Banana Jack Inputs Of General Purpose Multi-meters That Have Built-in Temperature Measurement Functions.

Category: Thermal Imager Accessories

Field Metrology Well with B Insert and Process Electronics, 50 to 660°C

Category: Process Meters

FLUKE85RF FREQUENCY PROBE THE 85RF HIGH FREQUENCY PROBE IS DESIGNED TO CONVERT A DC VOLTMETER WITH A INPUT IMPEDA NCE OF 10M OHMS INTO A HIGH F REQUENCY (100 KHZ TO 500 MHZ) RF VOLTMETER. CONVERSION FRO M AC TO DC IS ACCOMPLISHED ON A ONE-TO-ONE BASIS INCLUDES A RANGE OF 0.25 TO 30 VRMS. T HE PROBE'S DC OUTPUT IS CALIB RATED TO BE EQUIVALENT TO THE RMS VALUE OF A SINE WAVE INP UT

LinkIQ™ Industrial Ethernet Tester, Measure Network Capacity Up To 10 Gig Via Frequency Based Measurements, Troubleshoot Ative Networks By Providing Connected Switch Information (Switch Name, Port Number, & VLAN Info), Install & Troubleshoot PoE Devices Via Switch Negotiation & PoE Load Test, Graphical Wiremap & Length Test To Identify Common Faults That Occur With Cabling Installation, Document Work Through LinkWare™ PC Reporting, Support All Industrial Ethernet Protocols (EtherNet/IP, PROFINET, EtherCAT, & Others), Industrial Ethernet Kit Supports Industrial Connectors (M8D, M12D, M12X), Includes LinkIQ™ Cable + Network Tester With Multi-Connector Adapter With Magnetic S0trap, RJ45 Remote-ID #1, Quick Reference Guide, USB-C To USB-A Cable,?Charging? Cable, Cat6A Patch Cord, RJ45 Male To RJ45 Female Patch Cord, RJ45/M12X Patch Cord, RJ45/M12D Patch Cord, RJ45/M8D Patch Cord,?RJ45/11 Modular Adapter,?Hanging Strap With Remote ID Holder, & Duffle Bag

Category: Network Cable Testers

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Hart’s hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instrument’s multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2”, 3/8”,3/16”,1/8”, and 1/16” holes.

FLU 5615-12-P PROBE SECON. PRT 100 OHM (1/4 X 12 INCH)

FLU 5618B-12-P PROBE SECON. P

FLU ADP-MPO-A TYPE A POLARITY

FLU 5615-12-D PROBE SECON. PRT 100 OHM (1/4 X 12 INCH)