"in wall romex splice"

Solid W Combo Screw 8 In.

Category: Solid Wire Ground Pigtails

NSI GLC-440DB "HEAVY DUTY GRO

Category: Bare Wire Ground Clamps

NSI GCA-1L ALUMINUM LAY IN GR

NSI 1450-5 14 IN GREEN CABLE

NSI GCA-4L ALUMINUM LAY IN GR

NSI TWBS14 13 PC. 1/4 IN. DRI

NSI PC2020 2 X 2 SOLID WALL P

NSI GCA-2L ALUMINUM LAY IN GR

NSI N-HVS-824S 5-8KV IN- LINE

NSI PC3030 3 X 3 SOLID WALL P

Dual Rated Turn Prevent Lug 600 MCM - 2 AWG Dual Rated Turn Prevent Lugs are made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature Rating 90 degrees C.

Category: 1-Conductor Aluminum Mechanical Lugs

Winged Wire Connector, Blue, Easy Twist, 14-6 AWG, Standard Jar of 50

Category: Color Coded Twist On Wire Connectors

NSI PC4040 4 X 4 SOLID WALL P

NSI FTH20A ADHESIVE TIE MOUNT

Category: Cable Tie Bases

Hi-Temp Wire Connector, Black, Easy-Twist™, 600 Volt, 22-14 AWG, Bulk Pack of 10,000

Category: Color Coded Wire Connectors

Hi-Temp Wire Connector, Black, Easy-Twist™, 300 Volt, 22-18 AWG, Bulk 10000

Category: Color Coded Wire Connectors

Copper Lay-in Lug with stainless steel screws for grounding or in continuous loop bonding, 4-14AWG.

Jumper Grounding Strap with Single Flexible Braid 330 AMP - 24in. Flexible braid jumper grounding straps are recommended for motion due to expansion, contraction, vibration and operational movement of current carrying members. Manufactured from flat, extra-flexible tinned braid, they are available in a wide variety of sizes and amperages. The ferrules are made from pure electrolytic copper and are tin-plated. Standard mounting holes are 9/16" NEMA spaded holes.

Cable Tie, UV-Black, 8 Inch, 50 Pound, 100 Pack

Category: Non-Releasable Cable Ties

Heavy Duty Silicon Bronze Ground Rod Clamp for 3/4in. Rod Heavy Duty Ground Rod Clamps are made from silicon bronze for maximum strength. A silicon bronze screw furnishes maximum clamping force. All standard duty and heavy duty ground clamps are UL Listed for direct burial in earth or concrete.

6 Wire Polaris 1/0-14 AWG Uninsulated Multi-Cable Connector Blocks Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Caution Buried Electric Line Below - Detectable Tape - 6" x 1000' Yellow Consists of a minimum 5 mil overall thickness with no less than a 35 gauge solid aluminum foil core, which allows for easy detection of underground utilities. Specially formulated to resist degradation by elements normally encountered in soil. All printing is encased to avoid ink rub-off.

6 Wire Polaris 4-14 AWG Uninsulated Multi-Cable Connector Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

350-12AWG PolarisClear InsulatedSubmersible Pedestal Connector -3 port PolarisInsulated Submersible PedestalConnectors are manufactured from high strength 6061-T6 aluminum alloy, providing premium electrical and mechanical performance. Radial tipped set screws reduce conductor strand damage, and the range taking design allows for many sizes and types of conductors- all in one connector. Encapsulated in rubber with a nominal thickness of 125 mils. and high dielectric strength. ISPC connectors (clear) allow for an easier installation. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Meets or exceeds ANSI C119.4 Class A specifications. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. For use with copper and/or aluminum cables.

Category: Connector Blocks - Submersible - One Sided Wire Entry