"1025"

PS100-3 ROTATING EYE

Standard and illuminated push buttons and selector switches are available as both key and conventional operators. The CR104P line also includes push-to-test and standard pilot lights,mush-room-head push buttons,joysticks,and push-pull and push-push operators. Chrome-plated octagonal mounting rings project an attractive, high-quality appearance.Positive feel selector switches offer a quality touch in all illuminated and non-illuminated,maintained and spring return units. XG14 PR.No. CR109808

Category: Pilot Device Adapters & Rings

LMR SWP1212 MIN10 25W 50K

Heavy-Duty, Standard Length, Rotating Eye, K-Type. Cable Diameter - 1.000-1.490", Mesh Length - 33", Eye Diameter - 1 3/8", Break Strength - 16,400 lbs.

Standard and illuminated push buttons and selector switches are L03L PR.No. CR100118

Category: 30mm Knob Selector Switches

Heavy-Duty 30.5 mm Watertight/Oiltight Push Buttons. Joysticks.Release Type: Momentary. Suitable for use in NEMA Types 1, 3, 3R, 4, 4X, 12, and 13 applications when mounted in enclosures rates for those same applications. Boot is nitride rubber, check for application suitability.Three-position selector switch. Terminals are solder or quick connect type.

Category: 3-Position Joystick Operators

Push Button, Illuminated, Red Extended Head, 120V, Transformer Type, 6 Volt Lamp, Incandescent, 1 Normally Open, 1 Normally Closed, Contact Blocks

Category: 30mm Extended Pushbutton Operators

Push Button, Black, 1-3/8 Inch Mushroom, Momentary, 1 Normally Open, Contact Block

Category: 30mm Mushroom Head Pushbutton Operators

PUSHBUTTON ENCL 9 HOLE

GEC CR104PXP POTENTIOMETER OPERATOR

Category: Potentiometer Pilot Device Kits

C-H E34K6 SELECTOR SWITCH OPE

PB MECH INTERLOCK KIT

BTK PDP006EB3010/25-I/O-C4

Standard and illuminated push buttons and selector switches are L03E PR.No. CR100095

Voltage Tester With LED Flashlight, Non-Contact, Range 50-1000 Volt AC, Dust Tight And Water Proof, Audible Notification Disable, Auto Power Off, Low Battery Indication, UL Listed

Category: Voltage & Continuity Testers

Standard and illuminated push buttons and selector switches are available as both key and conventional operators. The CR104P line also includes push-to-test and standard pilot lights,mush-room-head push buttons,joysticks,and push-pull and push-push operators. Chrome-plated octagonal mounting rings project an attractive, high-quality appearance.Positive feel selector switches offer a quality touch in all illuminated and non-illuminated,maintained and spring return units. XG15 PR.No. CR109815

Category: Pilot Device Adapters & Rings

GED CR104PXM02E SEL SW KNOB YEL

Dr4/6 Din 2 Terminal

Pilot Light, Push to Test, 30mm, Amber, 120 Volt AC Supply, 6 Volt Incandescent, (#755)

Category: Press-To-Test Pilot Lights

Selector Switch, 2 Position, Keyed, Maintained, 2 Normally Open, 2 Normally Closed, Contact, Left or Right Key Removal, Cam Code 1

Category: Key Operated Switch Pilot Devices

C-H E34M6 ILLUMINATED PUSH-PU

PSCGPC CR2940U200R INDCTR LGT DUST CAP

Category: Pilot Device Pushbutton Caps

30.5 Mm, Corrosion Resistant Watertight/oiltight Non-illuminated Push-pull Operator Button, Standard (40 Mm), Red, Plastic, No Legend

Category: Pilot Device Non-Illuminated Push-Pull Buttons