"sc-250"

heavy Duty Ground Conn. 2" Pipe, Cable Range 250-2/0

NSI IPLD250-8C 250 MCM - 6 AW

6 Wire Polaris 750-250 MCM Non-UL Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Non-UL Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

NSI IPLD750-3B 750-250 MCM

16-14 AWG Nylon FULly InsUL., 50/Pack

Category: Wire Disconnect Adapters

16-14 AWG, .250 x .030 Tab Vinyl Insulated Male Disc., 100 Per Pack

NSI IPLMD750-12 750-250 MCM N

Double Male Tab .250 X .032 - 1,000 Per Pack

POLARIS VISION TAP 250 4 PORT SSE

22-18 AWG, .250 x .030 Tab Fully Insulated Female Nylon, 1,000 Per Pack

22-18 AWG, .250 x .030 Tab Nylon Fully Insulated, 1,000 Per Pack

NSI M16-250-3V-P 16-14 AWG VI

22-18 AWG Vinyl Insulated Female Disc .250X.032 Tab - 100 Per Pack

NSI F22-250-3V-P 22-18 AWG VI

16-14 AWG Bare Female Disc .250X.032 Tab, 100/Pack

NSI F16-250-3V-P 16-14 AWG VI

16-14 AWG Female Disconnect - 100/Pack

Easy-Splice Direct Burial Splice Kit with Rubber Cover 250 - 750 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Direct Burial Datacom Splice Kits

.500/ .250 Easy-Splice Thin Wall Tubing 48" - 1 Count Flexible flame-retardant, thin wall, general purpose heat shrinkable polyolefin tubing has a 2:1 shrink ratio. Used for electrical insulation, wire harness bundling, wire jacket marking and color coding, it also splices and makes functional terminations. Available in black, white, red, green, blue and clear. Standard packaging is either 6" lengths in blister boxes or in economical 25' spools. UL recognized to Standard 224. Black, white and colored thin wall tubing meet MIL-DTL-23053/5, Class 1. Clear meets MIL-DTL-23053/5, Class 2 and is not flame retardant. Rated 600 Volts, 125 C.

Category: Thin Wall Heat Shrink

Heavy Duty Copper C Tap Grounding Connector for 300 MCM to 2/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

Thin Wall Heat Shrink Kit Assortment: 25Pc - 125 x 6", 25Pc - 187 x 6", 20Pc - 250 x 6", 12Pc - 375 x 6", 7Pc - 500 x 6", 5Pc - 750 x 6", 600V

Category: Heat Shrink Kits

ON OFF - SPST - Nickel .250 QuikConnect BatToggle Switch

Category: 1-Pole Toggle Switches

ON ON - DPDT - Nickel .250 QuikConnect Bat Toggle Switch

Category: 2-Pole Toggle Switches

6 Port Aluminum Dual Rated Transformer Connector 750 MCM - 250 MCM Transformer Connectors are made from 6061T-6 aluminum alloy. They are electro-tin plated for low contact resistance. Two NEMA 1/2" holes for easy attachment. Rated 600 volts.

Category: Transformer Lug Kits