"f22-250-3v-p industries, llc"

NSI P16-250-3 16-14 AWG BARE

NSI FCT12-250-3-S COMPRESSOR

Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM

Category: Low Voltage Direct Burial Splice Kits

NSI IPLD250-3B 250 MCM - 6 AW

Category: Dual Sided Entry Wire Connector Blocks

8 Wire Polaris 250 MCM-6 AWG Uninsulated Multi-Cable Connector Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Non-Insulated Multi-Tap Connectors

NSI TL250-L2 250 MCM - 1/0 AW

Category: 2-Conductor Copper Mechanical Lugs

NSI IPLD750-6C 750-250 MCM NO

Category: Dual Sided Entry Wire Connector Blocks

(1)1000-250 Primary (6) 2/0-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

NSI IFL16-250-3N-BULK 16-14 I

NSI SF12-250-3-S 12-10 AWG UN

NSI M12-250-3N-BULK 12-10 AWG

NSI FCT12-250-3 12-8 AWG COMP

HTF16-250-3-S HIGH TEMP 15PKG

NSI F16-250-3N-BULK 16-14 AWG

NSI P22-250-3N 22-18 AWG NYLO

NSI IF12-250-3N-S INSULATED F

Fully Nylon Insulated Male Disconnect, 22-18 AWG, 600 Volt, Red, 50/Pack

Category: Male Nylon Insulated Wire Disconnects

2 Hole Long Barrel Copper Stacked Compression Lug 250 MCM - 1/2" Bolt Long Barrel Copper Stacked Compression Lugs is a type of copper compression connector that is produced from high conductivity copper tubing. They are designed for use with the L-N series. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference.

Category: 2-Hole Copper Compression Lugs

6 Wire Bagged Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

NSI IPLMD750-8 750-250 MCM NO

Category: Dual Sided Entry Wire Connector Blocks

8 Wire Polaris Insulated 750 - 250 MCM Heavy Duty Connector Block, Either Side Wire Entry Polaris Insul-Tap Heavy Duty Connectors are double the size of the standard IPLD Series connector with two pressure screws provided for each cable to ensure the best connection possible. Designed, built and tested to handle even the most demanding applications from 250 MCM to 750 MCM. Insulated with high-dielectric strength plastisol molded for a precise fit. Supplied with removable access plugs to allow for cable entry from either side of the connector. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV Resistant. Will not support combustion. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

CU CMP LUG LONG 250 MCM 3/8 BOLT-BELL

Category: 2-Hole Long Barrel Copper Compression Lugs

Aluminum Splicer Reducer 750 - 250 MCM Aluminum Splicer Reducers are used for splicing two copper or aluminum wires of equal or different sizes. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts.

Category: Aluminum Splice Reducing Lugs

NSI F12-250-3N-BULK 12-10 AWG