Search results

WAT HBL2 HB3 SERIES

WATDW311I

PAS HCL453PMMW

WAT C115NC

WAT HMRTC HARMONY MULTI LOCAT

The Form C power packs contain a single pole, double-throw isolated relay with a normally open and normally closed output. These power packs can be used with a standard occupancy sensor to interface with HVAC or other systems. Special attention needs to be made to the load ratings as they vary and are significantly lower than standard power packs. 277 Volts.

TOG SLIDE DIM CFL/LED/INCSP/3W 300W GRY

WAT LVSW102LA

FSP-321

WattStopper protective wire cages enclose our occupancy sensors in a safe cage that prevents the units from being tampered with or damaged. The cages use a strong, durable, web-like design and are constructed with 3/16ö coated steel wire. They are ideal for installation in gymnasiums, racquetball courts, classrooms and other institutional facilities, or any area susceptible to vandalism. They are low in cost and simple to install. By protecting occupancy sensors from damage, they also reduce maintenance costs. Fits: W-500A, W-1000A, W-2000A, W2000H,

WATTSTOPPER STPERW101

TOG SLIDE DIM CFL/LED/INCSP/3W 300W WH

Occupancy Sensor, Wall Switch, Dual Technology, Dual Relay, 120/277V, White. NOTE: As of April 28, 2025; DW-200-W has been replaced with the DSW-302-W, Platt #0108675.

Category: Passive Infrared Wall Switches

LOW VOLTAGE RELAY MECHANICAL LATCHING 30A 5-PIN PLUGGABLE CONN

Category: Lighting Control / Relay Panels

DLM Room Controller, 1 Relay, 0-10V Dimming, 10A (E-ballast or incandescent), Voltage: 120/277VAC; 50/60Hz., Class 2 Outputs: 24VDC, 150mA and 0-10VDC (0-10VDC signal also provided as Class 1). White.

Category: Digital Lighting Room Controllers

WAT FSP211

Category: Passive Infrared Fixture Mount Occupancy Sensors

WattStopper’s Emergency Lighting Control Unit (ELCU) is a self-contained, emergency lighting control device. The ELCU provides all required functionality to allow any standard lighting control device to control emergency lighting in conjunction with normal.

Category: Occupancy Sensor Power Packs

2 Relay Room Controller, 0-10V dimming

Category: Digital Lighting Room Controllers

0-10V To Phase Adaptive Converter: 120-277VAC; 60Hz, Power: 750W at 120VAC & 1300W at 277VAC.

Category: Digital Lighting Room Controllers

Digital Wall Switch: Input voltage: 24VDC from DLM local network; 5-Button, Multi-zone Scene Control, Infrared Transceiver, Dimmer, White. DLM local network connection: 2 RJ45 ports. Many button configurations; LED status indicator for each button. Note: Switches do not include face plates. Order decorator style plate separately.

Category: Digital Lighting Switches

Plenum Rated Local Network Cable, RJ45, Green, 35'

Category: Category 5e Patch Cords

PIR Sensor, Ceiling Mount, 24VDC, Coverage: 300 Sq.Ft.

Category: Passive Infrared Ceiling Mount Occupancy Sensors

This Super High Frequency Occupancy Sensor is a line voltage sensor that turns lighting on and off based on occupancy, and can hold lights off when sufficient daylight is available. It detects motion via super high frequency (SHF) electromagnetic waves and the Doppler principle. Because it can detect motion through many dense materials other than metal, this product can be installed behind fixture lenses and hidden from view.

Category: Passive Infrared Fixture Mount Occupancy Sensors

Lighting Control Panel Enclosure, 24 Relay Capacity, Surface Mount, NEMA 1, 32"x24"x4.67"

Category: Digital Lighting Enclosures