Search results

K-TYPE TEMPERATURE PIPE CLAMP

Category: Temperature Testers

Dual Display Digital Clamp Meter Allows Users To See Readings In Tight Space Areas, Ac/Dc Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Current And Ncvt Via Clamp; Ac/Dc Voltage, Resistance, Continuity, Frequency/Duty Cycle, Dc Microamps, Diode Test And Capacitance Via Test Leads; Temperature Via Thermocouple, Backlit Reverse-Contrast Lcds For Clear Data And Best Viewability In All Environments, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 2 X Aa Batteries, Ergonomic Design Provides A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters

K-TYPE TEMPERATURE PROBE

Category: Temperature Testers

Measures and Displays the USB Port Voltage, Current, Capacity, Energy and Resistance Simultaneously, Requires NO BATTERIES as it Draws Power from the Power Source

Category: Voltage & Continuity Testers

Clamp Meter, Maximum Rating: CAT IV 600V, CAT III 1000V, 600A, Features: True RMS, Amperage, Voltage, Resistance, Diodes, Includes: Carrying Pouch, Test Leads and Batteries

Category: AC Clamp Meters

3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C) Continuously Monitor Up to 1000 Hours of Voltage, Current, Capacity/Charge Delivered, Energy, and Resistance (Calculated), Tests Most Common Standard USB-A or USB-C Ports, Including Qualcomm Quick Charge® Ports

Category: Voltage & Continuity Testers

Allows The Measuring Of Current Draw Up To 15 Amps Without Splitting The Load's Power Cord, ***For North American-Style Outlets Only***

Category: Electrical Tester Accessories

Tone & Probe PRO Kit, Includes: VDV500-063 Tone Generator, VDV500-123 Tracing Probe aand VDV770-500 Zipper Pouch

Category: Wire Finders

Non-Contact Voltage Tester Pen, 50 to 1000V AC, Volt Pen With High Intensity, Bright Green LED Indicates The Tester Is Powered On, Auto Power-Off Feature Conserves and Extends Battery Life CAT IV 1000V Safety Rating, Includes: Instructions and (2) AAA 1.5 Volt Batteries

Category: Voltage & Continuity Testers

Replacement Fuse

Category: Electrical Tester Accessories

Infrared Digital Thermometer with Targeting Laser, 10:1, Measurement Range Is -4 To 752-Degree Fahrenheit (-20 To 400-Degree Celsius), Includes Custom Pouch And A 9V Battery ***Not A Medical Device; Thermometer Is NOT Intended For Use On People Or Animals***

Category: Temperature Testers

Multimeter Replacement Fuse, For Use with MM300 and MM400.

Category: Electrical Tester Accessories

Replacement Fuse for 5X20, 200MA, 600V, MM300

Category: Electrical Tester Accessories

Standard Banana-Type Inputs Compatible With Most Multimeters And Clamp Meters, Heavy-Duty Alligator Clips Attach To Wires And Other Conductors, Perfect For Insulation Resistance Testing, Includes 1-Pair of Universal Right-Angle Test Leads With Banana Plug To Heavy-Duty Alligator Clip, Leads Are 3-Foot (0.91 m) Long 18 AWG Double, Insulated Wire, CAT III 1000V/CAT IV 600V Safety Rating, Designed By Electricians, For Electricians

Category: Electrical Tester Clips

Cable Length Meter Measures Length of Electrical, Data, Two-Wire and NM-B® Cables Up to 3000 Feet (914 m), TDR Technology Measures Distance-to-Fault, Open or Short, on Terminated or Unterminated Cable, Programmed With Velocity of Propagation (VoP) Values for Coax, Data, NM-B® and Other Multiwire Cables for Accurate Length Measurement Within +/-(2-Percent Plus 3-Foot/0.9 m) Accuracy, Stores Custom Cable VoP Values for Consistently Accurate Results and Time Savings, Simple Interface With Full Color, Interactive LCD, Tones Unenergized, Open-Ended Wires For Wire Tracing (Requires Analog Probe (Cat. No. VDV500-123, Sold Separately), Coax-BNC or High Quality Alligator Clips for Quick, Easy Connection to Test Most Cable Types, RJ45 Jack for Accurate Length Measurement of Terminated Data Cables, Measurements Can be Switched Between and Metric and Imperial Units, Includes (2) AA Batteries, Padded Carrying Case and Leads

Category: Cable Length Meters

The 20-Foot Lead Adapters Are Perfect for Setting Up Connections for a Remote Ground for the ET450 to Optimize Signal Strength, The Cable Can be Used as an Extension on a Meter With Banana Jack Inputs, Leads Are 20-Foot (610 cm) Long, One Side of Cable Has Standard Banana Jack Type Inputs to Attach to the Meter, the Other Side Has a Smaller Diameter Connectors to Attach Alligator Clips, Outlet Tabs/Prongs, or Additional Cables, CAT III 1000V/CAT IV 600V Safety Rating, Double Insulated, Comes With Protective Caps for Connectors, For Use With the Advanced Circuit Tracer Kit (Cat. No. ET450) or Any Brand of Meter With Banana-Type Connectors

Category: Test Lead Sets

Multimeter Replacement Fuses, For Use with MM600 and MM700.

Category: Electrical Tester Accessories

Replacement Transmitter For the ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester, The ET310 Consists of Two Parts: a Transmitter Connected to the Electrical Outlet or Fixture, and a Receiver Used to Scan the Panel to Locate the Correct Breaker, The Transmitter Also Checks for Common Wiring Faults in North American Grounded Electrical Outlets, Transmitter Incorporates a GFCI Tester for Tripping GFCI Devices, The Transmitter May be Connected to Other Electrical Fixtures Using Optional Accessories Which are Sold Separately (Cat. No. 69411), Transmitter is Powered by the Circuit When Connected to the Electrical Outlet or Fixture; No Batteries Needed, CAT II 120V Safety Rating, Built to Withstand a 6.6-Foot (2 m) Drop

Category: Circuit Breaker Finders

Alligator Clips and Outlet Tabs Come in a Convenient 5-Piece Accessory Pack and Connect to 3-Foot and 20-Foot Lead Adapters, Large Red and Black Alligator Clips Are 3-1/4-Foot With Steel Teeth to Connect to the Circuit, Red and Black Blade Prong and Ground Prong Provide More Options to Attach to a Circuit, Nickel Plated Steel Connection and Thermal Plastic Body, Blade Outlet Tabs and Ground Prong are Safety Rated: CAT II 300V, Double Insulated, Alligator clips are Safety Rated: CAT III 1000V, CAT IV 600V, Double Insulated, For Use With Klein Tools Cat. No. ET450 and Klein Tools 3-Foot (Cat. No. 69359) and the 20-Foot (Cat. No. 69358) Banana Jack Cables

Category: Electrical Tester Clips

Combustible Gas Leak Detector, Detection Range: 50 to 10,000 ppm, 5-Red LED's (Visual) and 85 db audible alerts, Automatic Zero-Point Calibration, Two Levels of Detection: High & Low.

Category: Electrical Testers

Dual Range Non-Contact Voltage Tester With Receptacle Tester, Detects & Indicates Low Voltage Range & Standard Voltage (48-1000V AC), Conditions The Receptacle Tester Indicates: Wiring Correct, Open Ground, Reverse Polarity, Open Hot, Open Neutral, Hot/Ground Reversed, Includes: Non-Contact Voltage Tester With (2) AAA Batteries & Receptacle Tester

Category: Voltage & Continuity Testers

Lead Adapters are Perfect for Using an Alligator Clip or Outlet Tabs/Prongs to Attach to a Circuit, One Side of Cable Has Standard Banana Jack Type Inputs to Attach to the Meter, the Other Side Has a Smaller Diameter Connectors to Attach Alligator Clips, Outlet Tabs/Prongs, or Additional Cables, Provides Options for Connectivity to a Circuit for the ET450 or a Meter With Banana-Type Input Jacks, Safety Rated: CAT III 1000V/CAT IV 600V, Double Insulated, This Pair of Red and Black Cables Come with Protective Caps for Connectors, For Use With the Advanced Circuit Tracer Kit (Cat. No. ET450) or Any Brand of Meter With Banana-Type Connectors

Category: Test Lead Sets

Clamp Meter, Maximum Rating: CAT IV 600V, CAT III 1000V, 600A, Features: True RMS, Amperage, Voltage, Frequency, Resistance, Diodes, Includes: Carrying Pouch, Test Leads and Batteries

Category: AC Clamp Meters

Cl445 Hvac Clamp Meter Is An Automatically Ranging True Root Mean Square (Trms) Digital Clamp Meter, Digital Clamp Measures 600 A Ac Current And Inrush Current, Test Leads Measure 750V Ac/600V Dc Voltage, Dc Micro Amp, Resistance, Continuity, Frequency, Duty-Cycle, Capacitance, And Diode Tests, K-Type Thermocouple Port For Measuring Temperature From -148 To 1832-Degree Fahrenheit (-100 To 1000-Degree Celsius), Detect Ac Current With Non-Contact Voltage Tester Integrated Into The Clamp Jaw, Backlit Lcd With Dual V + A Function Allows Simultaneous Viewing Of Voltage And Current Measurements, Dedicated Mode For Capturing Dc Micro Amp And Inrush Current, Meter Has A Built-In Worklight To Illuminate In Low Light Areas, Cat Iv 600V, Cat Iii 750V, Class 2, Double Insulation Safety Rating, Includes Right-Angle Input Test Leads, Push-On Alligator Clips, K-Type Thermocouple, Storage Pouch, Instruction Manual, And 3 X Aaa Batteries, Can Be Used With Magnetic Hanger (Cat. No. 69417, Sold Separately) For Hands Free Operation

Category: Clamp Multimeters