"333d oz-gedney co / neer"

OZ-Gedney Type EL-9 90 DEG Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 2 IN, Connection: Tapered FNPT Hub, Dimension A: 5 IN, 4 IN Turning Radius, Third Party Certification: UL 34997, Hazardous Locations: Class I, Division

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 2-1/2 IN, 4 IN Outside Diameter, Length: 3-3/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Pa

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type Ax-8 Expansion Fitting, Trade Size: 1 IN, 2-5/8 IN Outside Diameter, Length: 10-5/8 IN, Flexibility: RMC And IMC, Malleable Or Ductile Iron, Third Party Certification: UL File Number E-11853 Per NEC 250.98, CSA 11584, Applicable Th

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3-1/2 IN, 5-1/8 IN Outside Diameter, Length: 3-1/2 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification Number/CID A-A-50563, ANSI/NEMA : FB-1, For Rigid Conduit And IMC

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1-1/2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 2-5/8 IN Maximum Diameter X 1-3/8 IN Length, 5/8 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-15/16 IN Maximum Diameter X 1-3/16 IN Length, 9/16 IN Thread Length, Third Party Cert

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1-1/2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2-5/8 IN Maximum Diameter X 1-3/8 IN Length, 5/8 IN Thread Length, Third Party Cert

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3/4 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Maximum Diameter X 7/8 IN Length, 7/16 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

Cable Support Plug, Type Multiple Segment, Body Type Tapered, Conduit Type Rigid/IMC/EMT, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 3 Inch, Cable Type Non-Armored, Number of Conductors 5 (Different Size), Size 4-1/8 Inch Dia X 3-3/8 Inch H, Material Canvas Bakelite, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19

Category: Iron Rigid Conduit Cable Supports

OZ-Gedney Type AX Expansion Fitting, Trade Size: 2 IN, 4 IN Outside Diameter, Length: 7-1/8 IN, Flexibility: RMC And IMC, Malleable Or Ductile Iron, Third Party Certification: UL File Number E-11853 Per NEC 250.98, CSA 11584, Applicable Third Party

Category: Iron Rigid Conduit Expansion Couplings

2-1/2" Pull Box Fittings, Weatherproof, Malleable Iron End Units, Includes: Copper Ground, Pressure Ring, and Type A Insulating Bushing. For Use with Rigid/IMC Conduit.

Category: Iron Rigid Conduit Pull Box Fittings

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 3-5/16 IN Maximum Diameter X 1-1/2 IN Length, 11/16 IN Thread Length, Third Party Certi

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type EL-9 90 DEG Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 1/2 IN, Connection: Tapered FNPT Hub, Dimension A: 1-1/2 IN, 3/4 IN Turning Radius, Third Party Certification: UL 34997, Hazardous Locations: Class I,

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type S Threaded Cable Support, Size: 4 IN, Body Of Fitting: Malleable Or Ductile Iron, Dimensions: 5-5/8 IN Outside Diameter X 3-7/8 IN Overall Height, Finish: Hot Dip Galvanized, Third Party Certification: UL File Number E-11853, CSA 1

Category: Iron Rigid Conduit Cable Supports

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 1/2 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Rigid Compression Couplings - Iron

Rigid Expansion Fitting, Type EX, 6 Inch, 8 Inch Conduit Movement (4 Inches in Either Direction), 15-3/8 Inch Length, Malleable Iron

Category: Iron Rigid Conduit Expansion Couplings

Split Coupling, 3/4"

Category: Iron Rigid Conduit Bolt-On Couplings

Cable Support, Type 1-Piece Plug, Body Type Tapered/Knurled, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 2-1/2 Inch, Cable Type Non-Armored, Number of Conductors 5 (Different Size), Size 3-3/4 Inch Dia x 3 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19, With pOZi-grip S-Style Wedging Plug

Category: Iron Rigid Conduit Cable Supports

Features: Physical Dimension 4 1/2 IN Diameter X 3 1/8 IN Height, Application: Rigid Conduit, IMC, EMT, Standard: UL 514B, CSA C22.2, NEC, Size: 3IN, Material: Malleable or Ductile Iron, Finish: Hot Dipped Galvanized

Category: Iron Rigid Conduit Cable Supports

TYPE S 3-1/2 IN CBL SPRT BDY

Category: Iron Rigid Conduit Cable Supports

5" Pull Box Fittings, Weatherproof, Malleable Iron End Units, Includes: Copper Ground, Pressure Ring, and Type A Insulating Bushing. For Use with Rigid/IMC Conduit.

Category: Iron Rigid Conduit Pull Box Fittings

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 1 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concretetight

Category: Rigid Compression Couplings - Iron

Features: Physical Dimension 3/4 In Length X 1 3/8 In Diameter, Thread Length 7/16 In , Application: Threadless Rigid Conduit, Standard: Ul 514b, Fed Spec: W-f-408e, NEMA: Fb-1, Size: 0.5in, Material: Malleable Iron, Finish: Zinc Electroplated

Category: Rigid Compression Connectors - Iron

Features: Physical Dimension 7/8 In Length X 1 9/16 In Diameter, Thread Length 7/16 In , Application: Threadless Rigid Conduit, Standard: Ul 514b, Fed Spec: W-f-408e, NEMA: Fb-1, Size: 0.75in, Material: Malleable Iron, Finish: Zinc Electroplated

Category: Rigid Compression Connectors - Iron