Search results

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 1 1/2inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Rigid Compression Couplings - Iron

Conduit Sealing Bushing, Type: CSBE, Size: 3 Inch, 1 to 4 Wires, Material: Malleable Iron

Category: Iron Rigid Conduit Cable Supports

Pulling Elbow, Threaded, Female / Female, 1 Inch, Malleable Iron, Rigid Conduit / IMC, With Gasket, 90°, UL, CSA, Gasketed, Watertight

Category: Iron Rigid Conduit Elbows

Oz-g Ff-300 3-in Fem/fem Pull ell

Category: Iron Rigid Conduit Elbows

Cable Support Plug, Type 1-Piece, Body Type Tapered/Knurled, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 3 Inch, Cable Type Non-Armored, Number of Conductors 5 (Different Size), Size 4-1/2 Inch Dia X 3-1/8 Inch H, Material Impregnated Hardwood, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19

Category: Iron Rigid Conduit Cable Supports

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3 IN, Connection: Compression X MNPT Hub, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 4-13/16 IN Maximum Diameter X 2-7/16 IN Length, 1 IN Thread Length, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

OZG AXB100 1" EXP CLPG W/ INT

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3 IN, 4-3/16 IN Outside Diameter, Length: 3-5/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third P

Category: Iron Rigid Conduit Three Piece Couplings

OZG S-4000-BO TYPE S 4" CBL S

Category: Iron Rigid Conduit Cable Supports

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 2-1/2 IN, 4 IN Outside Diameter, Length: 3-3/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Pa

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type EL-9 90 DEG Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 2 IN, Connection: Tapered FNPT Hub, Dimension A: 5 IN, 4 IN Turning Radius, Third Party Certification: UL 34997, Hazardous Locations: Class I, Division

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type Ax-8 Expansion Fitting, Trade Size: 1 IN, 2-5/8 IN Outside Diameter, Length: 10-5/8 IN, Flexibility: RMC And IMC, Malleable Or Ductile Iron, Third Party Certification: UL File Number E-11853 Per NEC 250.98, CSA 11584, Applicable Th

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1-1/2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 2-5/8 IN Maximum Diameter X 1-3/8 IN Length, 5/8 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3-1/2 IN, 5-1/8 IN Outside Diameter, Length: 3-1/2 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification Number/CID A-A-50563, ANSI/NEMA : FB-1, For Rigid Conduit And IMC

Category: Iron Rigid Conduit Three Piece Couplings

OZG 28-075T 3/4" SSCR RGD CN

Category: Iron Rigid Conduit Set Screw Connectors

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1-1/2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2-5/8 IN Maximum Diameter X 1-3/8 IN Length, 5/8 IN Thread Length, Third Party Cert

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3/4 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Maximum Diameter X 7/8 IN Length, 7/16 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-15/16 IN Maximum Diameter X 1-3/16 IN Length, 9/16 IN Thread Length, Third Party Cert

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type Ax-8 Expansion Fitting, Trade Size: 4 IN, 6-5/8 IN Outside Diameter, Length: 12-3/8 IN, Flexibility: RMC And IMC, Malleable Or Ductile Iron, Third Party Certification: UL File Number E-11853 Per NEC 250.98, CSA 11584, Applicable Th

Category: Iron Rigid Conduit Expansion Couplings

Cable Support Body, Type Knurled/Tapered, Plug Type 1-Piece, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 3 Inch, Cable Type Non-Armored, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19

Category: Iron Rigid Conduit Cable Supports

Oz-g Mf-150 1-1/2 Fem/male pull Ell

Category: Iron Rigid Conduit Elbows

Oz-g Ce-050 1/2 90d Capped ell

Category: Iron Rigid Conduit Elbows

OZG S-2500-BO TYPE S 2-1/2" C

Category: Iron Rigid Conduit Cable Supports

90° Concrete Slab Insert, Threaded for Rigid/IMC, 1/2 Inch, Malleable Iron - Zinc Plated

Category: Iron Rigid Conduit Elbows