"wc-r-c"
34 Found
NSI Tork
POLARIS Ins Multi-Tap 600 10 Port DSE
Item #: 0250194
CAT #: IPLD600-10
UPC: 662381789570
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 750 4 Port DSE
Item #: 0335870
CAT #: IPLD750-4
UPC: 662381926029
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 500 10 Port
Item #: 0250238
CAT #: IPLMD500-10
UPC: 662381945082
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 600 6 Port
Item #: 0250244
CAT #: IPLMD600-6
UPC: 662381789181
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 500 4 Port SSE
Item #: 0264002
CAT #: IPL500-4
UPC: 662381915023
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 3/0 5 Port SSE
Item #: 0424003
CAT #: IPL3/0-5
UPC: 662381912039
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 500 8 Port SSE
Item #: 0264023
CAT #: IPL500-8
UPC: 662381915061
Company wide:
NSI Tork
POLARIS Ins Splice 250 Bagged
Item #: 0250279
CAT #: ISR-250B
UPC: 662381954022
Company wide:
NSI Tork
NSI IPLG6-3B 6-14 AWG (CLASS B,C,D
Item #: 0250210
CAT #: IPLG6-3B
UPC: 662381959423
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 500 12 Port
Item #: 0250239
CAT #: IPLMD500-12
UPC: 662381945105
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 250 4 Port
Item #: 0136875
CAT #: IPLMD250-4
UPC: 662381943026
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 250 12 Port DSE
Item #: 0250163
CAT #: IPLD250-12
UPC: 662381923103
Company wide:
NSI Tork
POLARIS Stack Ins Multi-Tap 750 10 Port
Item #: 0250198
CAT #: IPLDS750-10
UPC: 662381951755
Company wide:
NSI Tork
POLARIS HD Ins Multi-Tap 750 8 Port DSE
Item #: 0250195
CAT #: IPLDH750-8
UPC: 662381926555
Company wide:
NSI Tork
POLARIS Multi Tap 250 6 Port DSE Bagged
Item #: 0250175
CAT #: IPLD250-6B
UPC: 662381955043
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 600 10 Port
Item #: 0250240
CAT #: IPLMD600-10
UPC: 662381789228
Company wide:
NSI Tork
NSI ITG-1B "1-10 AWG ( B,C,D)
Item #: 0918530
CAT #: ITG-1B
UPC: 662381959461
Company wide:
NSI Tork
POLARIS Stack Ins Multi-Tap 750 12 Port
Item #: 0250201
CAT #: IPLDS750-12
UPC: 662381951762
Company wide:
NSI Tork
POLARIS EDGE Connector 350 6 Port Blk
Item #: 0020823
CAT #: ISPB350-6
UPC: 662381788979
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 750 8 Port DSE
Item #: 0832308
CAT #: IPLD750-8
UPC: 662381926067
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 1/0 5 Port
Item #: 0250218
CAT #: IPLM1/0-5
UPC: 662381931030
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 3/0 10 Port DSE
Item #: 0250177
CAT #: IPLD3/0-10
UPC: 662381927088
Company wide:
NSI Tork
POLARIS Ins Multi Tap 250 2 Port Bagged
Item #: 0250286
CAT #: IT-250B
UPC: 662381953049
Company wide:
NSI Tork
NSI ITG-3/0B 3/0-4 AWG ( B,C,D) 2/0
Item #: 0250298
CAT #: ITG-3/0B
UPC: 662381959539
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 600 10 Port DSE
10 Wire Polaris 600 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250194
CAT #: IPLD600-10
UPC: 662381789570
Category:
Single Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 750 4 Port DSE
4 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0335870
CAT #: IPLD750-4
UPC: 662381926029
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 500 10 Port
10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250238
CAT #: IPLMD500-10
UPC: 662381945082
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 600 6 Port
6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250244
CAT #: IPLMD600-6
UPC: 662381789181
Category:
Single Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 500 4 Port SSE
4 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
Item #: 0264002
CAT #: IPL500-4
UPC: 662381915023
Category:
Single Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 3/0 5 Port SSE
5 Wire Polaris3/0-6 AWG Insul-Tap Connector Polaris Insul-Tap Connectors are suitable for connecting five wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
Item #: 0424003
CAT #: IPL3/0-5
UPC: 662381912039
Category:
Single Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 500 8 Port SSE
8 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting eight wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
Item #: 0264023
CAT #: IPL500-8
UPC: 662381915061
Category:
Single Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
POLARIS Ins Splice 250 Bagged
250 MCM - 6 AWG Bagged Polaris InsulatedIn-Line SpliceConnector Polaris Insulated In-Line Splice Connectors are suitable for connecting two wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
Item #: 0250279
CAT #: ISR-250B
UPC: 662381954022
Category:
ln-Line Splicers/Reducers - Insulated
Company wide:
NSI Tork
NSI IPLG6-3B 6-14 AWG (CLASS B,C,D
NSI IPLG6-3B 6-14 AWG (CLASS
Item #: 0250210
CAT #: IPLG6-3B
UPC: 662381959423
Category:
Single Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 500 12 Port
12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250239
CAT #: IPLMD500-12
UPC: 662381945105
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 250 4 Port
4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0136875
CAT #: IPLMD250-4
UPC: 662381943026
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 250 12 Port DSE
12 Wire Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250163
CAT #: IPLD250-12
UPC: 662381923103
Category:
Dual Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
POLARIS Stack Ins Multi-Tap 750 10 Port
10 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250198
CAT #: IPLDS750-10
UPC: 662381951755
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS HD Ins Multi-Tap 750 8 Port DSE
8 Wire Polaris Insulated 750 - 250 MCM Heavy Duty Connector Block, Either Side Wire Entry Polaris Insul-Tap Heavy Duty Connectors are double the size of the standard IPLD Series connector with two pressure screws provided for each cable to ensure the best connection possible. Designed, built and tested to handle even the most demanding applications from 250 MCM to 750 MCM. Insulated with high-dielectric strength plastisol molded for a precise fit. Supplied with removable access plugs to allow for cable entry from either side of the connector. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV Resistant. Will not support combustion. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250195
CAT #: IPLDH750-8
UPC: 662381926555
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Multi Tap 250 6 Port DSE Bagged
6 Wire Bagged Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250175
CAT #: IPLD250-6B
UPC: 662381955043
Category:
Dual Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 600 10 Port
10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250240
CAT #: IPLMD600-10
UPC: 662381789228
Category:
Single Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
NSI ITG-1B "1-10 AWG ( B,C,D)
NSI ITG-1B "1-10 AWG ( B,C,D)
Item #: 0918530
CAT #: ITG-1B
UPC: 662381959461
Category:
Single Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Stack Ins Multi-Tap 750 12 Port
12 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250201
CAT #: IPLDS750-12
UPC: 662381951762
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS EDGE Connector 350 6 Port Blk
350-12AWG Polaris Black InsulatedSubmersible Pedestal Connector -6 port PolarisInsulated Submersible PedestalConnectors are manufactured from high strength 6061-T6 aluminum alloy, providing premium electrical and mechanical performance. Radial tipped set screws reduce conductor strand damage, and the range taking design allows for many sizes and types of conductors- all in one connector. Encapsulated in rubber with a nominal thickness of 125 mils. and high dielectric strength. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Meets or exceeds ANSI C119.4 Class A specifications. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. For use with copper and/or aluminum cables.
Item #: 0020823
CAT #: ISPB350-6
UPC: 662381788979
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 750 8 Port DSE
8 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0832308
CAT #: IPLD750-8
UPC: 662381926067
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Mount Ins Multi-Tap 1/0 5 Port
5 Wire Polaris 1/0-14 AWG Insulated Multi-Cable Connector with Mounting Holes, One Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on one side only. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLM Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250218
CAT #: IPLM1/0-5
UPC: 662381931030
Category:
Single Sided Entry Wire Connector Blocks
Company wide:
NSI Tork
POLARIS Ins Multi-Tap 3/0 10 Port DSE
10 Wire Polaris 3/0 - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250177
CAT #: IPLD3/0-10
UPC: 662381927088
Category:
Dual Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
POLARIS Ins Multi Tap 250 2 Port Bagged
250 MCM - 6 AWG bAGGEDPolaris Insulated Tap Connector- Dual Sided Entry Polaris Insul-Tap Connectors are suitable for connecting two wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).
Item #: 0250286
CAT #: IT-250B
UPC: 662381953049
Category:
Dual Sided Entry Wire Connector Blocks
Made in USA
Company wide:
NSI Tork
NSI ITG-3/0B 3/0-4 AWG ( B,C,D) 2/0
NSI ITG-3/0B 3/0-4 AWG ( BCD)
Item #: 0250298
CAT #: ITG-3/0B
UPC: 662381959539
Category:
Dual Sided Entry Wire Connector Blocks
Company wide:
34 Items found