Search results

COPPER SPLIT BOLT 1000

Category: Copper Alloy Split Bolts

NSI C16-N-S 16-14 AWG CLOSED

Category: Insulated Copper Crimp Connectors

NSI L256 2 AWG CU COMPRESSION

Category: 2-Hole Long Barrel Copper Compression Lugs

Copper Terminal Lug 4 - 14 AWG Copper Terminal Lugs are made of high copper alloy. They are used for joining a wide range of cables or terminal blocks.

Category: 1-Conductor Copper Mechanical Lugs

NSI S22-4N 22-18 AWG NYLON IN

Category: Nylon Insulated Standard Fork Terminals

NSI HWHS20-750-6 2/0 AWG - 75

Category: Heavy Wall Heat Shrink

Service Post Connector - One Wire Type 6 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Category: 2-Wire Service Post Connectors

NSI IPLD3/0-4B 3/0-6 AWG POLA

Category: Dual Sided Entry Wire Connector Blocks

Vinyl Insulated Ring, 12-10 AWG, 1/4" Stud, 300 Volt, Yellow, Small Pack of 20

Category: Vinyl Insulated Ring Tongues

NSI 1500LL2 DOUBLE SCREW LUG

Category: 1-Conductor Aluminum Mechanical Lugs

Heavy Wall Heat Shrink, Type: Easy-Splice™, Wire Range: 8 - 2 AWG, 48 Inch Length, Expanded/Recovered: 0.170/0.550 Inch, Color: Black, Material: Polyolefin, Rated For Direct Burial & Submersible.

Category: Heavy Wall Heat Shrink

1.00/.50 Thin Wall Heat Shrink, 25 Ft Spool, 600 Volt, Round, Polyolefin

Category: Thin Wall Heat Shrink

NSI L20N-14P #2/0 AWG MAX WIR

Category: 2-Hole Long Barrel Copper Compression Lugs

Heavy Duty Copper C Tap Grounding Connector for 350 MCM to 4/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

NSI IPLMD2505 NSIIPLMD2505

Category: Dual Sided Entry Wire Connector Blocks

Ring Terminal, Nylon Insulated, 16 - 14 AWG, Stud Size: #8, Color: Blue, Package of 100 Each.

Category: Nylon Insulated Ring Tongues

22-18 AWG, # 8 Stud Vinyl Insulated Block Spade, 100 Per Pack

Category: Vinyl Insulated Block Fork Terminals

12 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Nylon Insulated Male Disconnect, 22-18 AWG, 600 Volt, Red, 100/Pack

Category: Male Nylon Insulated Wire Disconnects

Long Barrel TinnedCopperSplice 3/0 AWG Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: Long Barrel Copper Compression Sleeves

NSI IPLMD600-12 600 MCM - 6 A

Category: Single Sided Entry Wire Connector Blocks

NSI IF22-187-2N 22-18 AWG FUL

Category: Wire Disconnect Adapters

NSI S12-14 12-10 AWG BARE SPA

Category: Non-Insulated Locking Fork Terminals

Hi-Temp Wire Connector, Black, Easy-Twist™, 300 Volt, 22-18 AWG, 1000/Bag

Category: Color Coded Wire Connectors