Mounting Hardware & Brackets

55 Found

In Stock Only

List

Grid

Bracket, 5/8" Thr. Rod Top Support Adj.

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod

Item #: 0531048

CAT #: FR6ACB58

UPC: 074983839827

Category: Mounting Hardware & Brackets

Company wide:

FiberRunner Threaded Rod Trapeze Bracket

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 24" (610mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 24" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB24BL bra

Item #: 0546979

CAT #: FRTBWG24BL

UPC: 074983332199

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 12mm Thr. Rod QuikLock for

Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 12mm Threaded Rod.

Item #: 0339795

CAT #: FR6TRBN12M

UPC: 074983829682

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 16mm Thr. Rod QuikLock for

Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Threaded Rod.

Item #: 0531073

CAT #: FR6TRBN58M

UPC: 074983829699

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Adjustable Cabinet QuikLock for

Used to support the 6x4 and 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 9" (229mm) allowing runs to be leveled over uneven cabinet heights. Bracket is secured to the cabinet frame with through bolts (not included). The

Item #: 0531044

CAT #: FR6ACAB

UPC: 074983908844

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 16mm Threaded Rod QuikLock

Used to support the 12x4 system from new threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Item #: 0530928

CAT #: FR12TRBN58M

UPC: 074983835843

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 1/2" Thr. Rod QuikLock for

Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 1/2" Threaded Rod.

Item #: 0339778

CAT #: FR6TRBN12

UPC: 074983799183

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 16mm Thr. Rod Center Support Qu

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly

Item #: 0531056

CAT #: FR6CS58M

UPC: 074983839742

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 12mm Thr. Rod Center Support Qu

Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the

Item #: 0530914

CAT #: FR12CS12M

UPC: 074983835911

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 12mm Thr. Rod Trapeze QuikLock

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Item #: 0531064

CAT #: FR6TB12M

UPC: 074983852840

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 1/2" Thr. Rod Trapeze QuikLock

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Item #: 0531063

CAT #: FR6TB12

UPC: 074983852833

Category: Mounting Hardware & Brackets

Company wide:

Bracket, For 3/8" Threaded Rod to 1 1/2

Used to support the 6x4 and 4x4 systems attaching directly to any 3/8 (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. No threaded rod required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver

Item #: 0531060

CAT #: FR6LRB

UPC: 074983799206

Category: Mounting Hardware & Brackets

Company wide:

Accessory, QuikLock Mounting Clips, Fibe

Used wherever additional FiberRunner® Slide Clamps would be helpful. For example, use on 12x4 FiberRunner® QuikLock™ Brackets to accommodate dual runs of 6x4 or 4x4 FiberRunner® Channel.

Item #: 0531383

CAT #: FRQMC-X

UPC: 074983867936

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Trapeze, 24x4 for 1/2" New Thre

Used to support the 24x4 system from new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Item #: 0530969

CAT #: FR24TBN12

UPC: 074983117024

Category: Mounting Hardware & Brackets

Company wide:

Bracket, NetFrame/NetRack QuikLock for 4

Used to support the 6x4 and 4x4 systems attaching to the top of NetFrame® or NetRack™ Rack. (Contains all necessary mounting hardware.) Bracket accepts 5/8" threaded rod.

Item #: 0531459

CAT #: FRRMBNF58

UPC: 074983847488

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 1/2" Thr. Rod Top Support Adj.

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod

Item #: 0531046

CAT #: FR6ACB12

UPC: 074983839803

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Existing 16mm Thr. Rod QuikLock

Used to support the 6x4 and 4x4 systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Thread

Item #: 0531071

CAT #: FR6TRBE58M

UPC: 074983829675

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Trapeze, 24" W Cable Pathways

Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod

Item #: 0530920

CAT #: FR12TB2412M

UPC: 074983121052

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 1/2" Thr. Rod Trapeze QuikLock

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in

Item #: 0530917

CAT #: FR12TB12

UPC: 074983847464

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Top Support Adjustable "C" for

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with tw

Item #: 0530909

CAT #: FR12ACB58

UPC: 074983835942

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Adjustable Ladder QuikLock Brac

Used to support the 12x4 system attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod require

Item #: 0530911

CAT #: FR12ALB

UPC: 074983835881

Category: Mounting Hardware & Brackets

Company wide:

FiberRunner Threaded Rod Trapeze Bracket

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 18" (457mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 18" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB18BL bra

Item #: 0546978

CAT #: FRTBWG18BL

UPC: 074983332182

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 5/8" Thr. Rod Center Support Qu

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly

Item #: 0531055

CAT #: FR6CS58

UPC: 074983839735

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 12mm Thr. Rod Trapeze QuikLock

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in

Item #: 0530918

CAT #: FR12TB12M

UPC: 074983847471

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 5/8" Thr. Rod Top Support Adj.

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod

Item #: 0531048

CAT #: FR6ACB58

UPC: 074983839827

Category: Mounting Hardware & Brackets

Company wide:

FiberRunner Threaded Rod Trapeze Bracket

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 24" (610mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 24" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB24BL bra

Item #: 0546979

CAT #: FRTBWG24BL

UPC: 074983332199

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 12mm Thr. Rod QuikLock for

Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 12mm Threaded Rod.

Item #: 0339795

CAT #: FR6TRBN12M

UPC: 074983829682

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 16mm Thr. Rod QuikLock for

Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Threaded Rod.

Item #: 0531073

CAT #: FR6TRBN58M

UPC: 074983829699

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Adjustable Cabinet QuikLock for

Used to support the 6x4 and 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 9" (229mm) allowing runs to be leveled over uneven cabinet heights. Bracket is secured to the cabinet frame with through bolts (not included). The

Item #: 0531044

CAT #: FR6ACAB

UPC: 074983908844

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 16mm Threaded Rod QuikLock

Used to support the 12x4 system from new threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Item #: 0530928

CAT #: FR12TRBN58M

UPC: 074983835843

Category: Mounting Hardware & Brackets

Company wide:

Bracket, New 1/2" Thr. Rod QuikLock for

Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 1/2" Threaded Rod.

Item #: 0339778

CAT #: FR6TRBN12

UPC: 074983799183

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 16mm Thr. Rod Center Support Qu

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly

Item #: 0531056

CAT #: FR6CS58M

UPC: 074983839742

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 12mm Thr. Rod Center Support Qu

Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the

Item #: 0530914

CAT #: FR12CS12M

UPC: 074983835911

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 12mm Thr. Rod Trapeze QuikLock

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Item #: 0531064

CAT #: FR6TB12M

UPC: 074983852840

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 1/2" Thr. Rod Trapeze QuikLock

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Item #: 0531063

CAT #: FR6TB12

UPC: 074983852833

Category: Mounting Hardware & Brackets

Company wide:

Bracket, For 3/8" Threaded Rod to 1 1/2

Used to support the 6x4 and 4x4 systems attaching directly to any 3/8 (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. No threaded rod required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver

Item #: 0531060

CAT #: FR6LRB

UPC: 074983799206

Category: Mounting Hardware & Brackets

Company wide:

Accessory, QuikLock Mounting Clips, Fibe

Used wherever additional FiberRunner® Slide Clamps would be helpful. For example, use on 12x4 FiberRunner® QuikLock™ Brackets to accommodate dual runs of 6x4 or 4x4 FiberRunner® Channel.

Item #: 0531383

CAT #: FRQMC-X

UPC: 074983867936

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Trapeze, 24x4 for 1/2" New Thre

Used to support the 24x4 system from new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Item #: 0530969

CAT #: FR24TBN12

UPC: 074983117024

Category: Mounting Hardware & Brackets

Company wide:

Bracket, NetFrame/NetRack QuikLock for 4

Used to support the 6x4 and 4x4 systems attaching to the top of NetFrame® or NetRack™ Rack. (Contains all necessary mounting hardware.) Bracket accepts 5/8" threaded rod.

Item #: 0531459

CAT #: FRRMBNF58

UPC: 074983847488

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 1/2" Thr. Rod Top Support Adj.

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod

Item #: 0531046

CAT #: FR6ACB12

UPC: 074983839803

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Existing 16mm Thr. Rod QuikLock

Used to support the 6x4 and 4x4 systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Thread

Item #: 0531071

CAT #: FR6TRBE58M

UPC: 074983829675

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Trapeze, 24" W Cable Pathways

Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod

Item #: 0530920

CAT #: FR12TB2412M

UPC: 074983121052

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 1/2" Thr. Rod Trapeze QuikLock

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in

Item #: 0530917

CAT #: FR12TB12

UPC: 074983847464

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Top Support Adjustable "C" for

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with tw

Item #: 0530909

CAT #: FR12ACB58

UPC: 074983835942

Category: Mounting Hardware & Brackets

Company wide:

Bracket, Adjustable Ladder QuikLock Brac

Used to support the 12x4 system attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod require

Item #: 0530911

CAT #: FR12ALB

UPC: 074983835881

Category: Mounting Hardware & Brackets

Company wide:

FiberRunner Threaded Rod Trapeze Bracket

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 18" (457mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 18" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB18BL bra

Item #: 0546978

CAT #: FRTBWG18BL

UPC: 074983332182

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 5/8" Thr. Rod Center Support Qu

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly

Item #: 0531055

CAT #: FR6CS58

UPC: 074983839735

Category: Mounting Hardware & Brackets

Company wide:

Bracket, 12mm Thr. Rod Trapeze QuikLock

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in

Item #: 0530918

CAT #: FR12TB12M

UPC: 074983847471

Category: Mounting Hardware & Brackets

Company wide:

55 Items found