Call for price
Company wide:
0
in stock
Documents & Guides
BUR X241 X DIE (OUR 840)
Overview
BUR X241 X DIE (OUR 840)
The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes on transmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trench should be refilled and tamped.
Also known as: 781810528723, X241, BURX241
Features & Benefits
- Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
- Painted with black paint
- Nut retainer on bottom of anchor holds nut in place during installation
- 2nd alternate image: Top view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
- 1st alternate image: Bottom view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
Specifications
| Standards: | California Proposition 65 |
| Standards: | California Proposition 65 |