$ 427.46 EA
Company wide:
0
in stock
Documents & Guides
1-Piece Flush-Mount Floor Brush Kit with Cover and Two-Stage Sealing
Overview
1-Piece Flush-Mount Floor Brush Kit with Cover and Two-Stage Sealing
Flush-Mount Floor Brush Kit with Cover is a heavy-duty two-stage sealing system. Brush and EPDM gasket provide the most effective air seal. Heavy-duty, integrated safety cover allows installation of the grommet during the construction phase and eliminates the risk of injury by stepping through the grommet opening. OSHA jobsite standards require open holes in floor panels to be covered. Easy-to-install system integrates with the access floor static dissipative system. NEC, UL and NEMA require safety covers and cable protection against sharp edges.
Also known as: 783510187088, DFB57F, HOFDFB57F
Features & Benefits
- Blocks up to 90 percent of cold air leakage around power and data cables
- Flush mounts provide a low profile and grommet to raised-floor panel cutouts (required by NEC and NFPA)
- Surface mount provides an easy-to-use retrofit to existing raised-floor cutouts
- Adjustable flush mount provides an extra-large cable capacity and can be cut to size to fit the application
- Overlapping bristles conform around data and power cables to minimize air leakage through raised floor and improve overall data center cooling efficiency
- Reduction of cold air loss through raised-floor plenums helps to increase under floor static pressure
- Cover provides protection during build out
- Smooth, rounded low-profile flush mount edges protect cables from sharp raised-floor edges
- Two-piece surface mount and adjustable floor brush kits have self-sticking adhesive to expedite installation
- Raised-floor tiles need not be removed for installation
Specifications
| Color: | Black |
| Finish: | Smooth Matte |
| Material: | ABS Polycarbonate |
| Weight: | 2.200 lb |
| Color: | Black |
| Material: | ABS Polycarbonate |
| Finish: | Smooth Matte |
| Weight: | 2.200 lb |